CVEs
Sourced from CVEProject/cvelistV5 and the CISA KEV catalog.
351,354 CVEs
CVSS
CVE
Description
KEV added
PoCs
info
CVE-2025-40105
In the Linux kernel, the following vulnerability has been resolved:
vfs: Don't leak disconnected dentries on umount
When user calls open_by_handle_at() on some inode that is not cached, we
will create disconnected dentry for it. If such dentry is a directory,
exportfs_decode_fh_raw() will then try to connect this dentry to the
dentry tree through reconnect_path(). It may happen for various reasons
(such as corrupted fs or race with rename) that the call to
lookup_one_unlocked() in reconnect_one() will fail to find the dentry we
are trying to reconnect and instead create a new dentry under the
parent. Now this dentry will not be marked as disconnected although the
parent still may well be disconnected (at least in case this
inconsistency happened because the fs is corrupted and .. doesn't point
to the real parent directory). This creates inconsistency in
disconnected flags but AFAICS it was mostly harmless. At least until
commit f1ee616214cb ("VFS: don't keep disconnected dentries on d_anon")
which removed adding of most disconnected dentries to sb->s_anon list.
Thus after this commit cleanup of disconnected dentries implicitely
relies on the fact that dput() will immediately reclaim such dentries.
However when some leaf dentry isn't marked as disconnected, as in the
scenario described above, the reclaim doesn't happen and the dentries
are "leaked". Memory reclaim can eventually reclaim them but otherwise
they stay in memory and if umount comes first, we hit infamous "Busy
inodes after unmount" bug. Make sure all dentries created under a
disconnected parent are marked as disconnected as well.
2025-10-30
—
info
CVE-2025-40104
In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: fix mailbox API compatibility by negotiating supported features
There was backward compatibility in the terms of mailbox API. Various
drivers from various OSes supporting 10G adapters from Intel portfolio
could easily negotiate mailbox API.
This convention has been broken since introducing API 1.4.
Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added support
for IPSec which is specific only for the kernel ixgbe driver. None of the
rest of the Intel 10G PF/VF drivers supports it. And actually lack of
support was not included in the IPSec implementation - there were no such
code paths. No possibility to negotiate support for the feature was
introduced along with introduction of the feature itself.
Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication
between PF and VF") increasing API version to 1.5 did the same - it
introduced code supported specifically by the PF ESX driver. It altered API
version for the VF driver in the same time not touching the version
defined for the PF ixgbe driver. It led to additional discrepancies,
as the code provided within API 1.6 cannot be supported for Linux ixgbe
driver as it causes crashes.
The issue was noticed some time ago and mitigated by Jake within the commit
d0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5").
As a result we have regression for IPsec support and after increasing API
to version 1.6 ixgbevf driver stopped to support ESX MBX.
To fix this mess add new mailbox op asking PF driver about supported
features. Basing on a response determine whether to set support for IPSec
and ESX-specific enhanced mailbox.
New mailbox op, for compatibility purposes, must be added within new API
revision, as API version of OOT PF & VF drivers is already increased to
1.6 and doesn't incorporate features negotiate op.
Features negotiation mechanism gives possibility to be extended with new
features whe
2025-10-30
—
info
CVE-2025-40103
In the Linux kernel, the following vulnerability has been resolved:
smb: client: Fix refcount leak for cifs_sb_tlink
Fix three refcount inconsistency issues related to `cifs_sb_tlink`.
Comments for `cifs_sb_tlink` state that `cifs_put_tlink()` needs to be
called after successful calls to `cifs_sb_tlink()`. Three calls fail to
update refcount accordingly, leading to possible resource leaks.
2025-10-30
—
info
CVE-2025-40102
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Prevent access to vCPU events before init
Another day, another syzkaller bug. KVM erroneously allows userspace to
pend vCPU events for a vCPU that hasn't been initialized yet, leading to
KVM interpreting a bunch of uninitialized garbage for routing /
injecting the exception.
In one case the injection code and the hyp disagree on whether the vCPU
has a 32bit EL1 and put the vCPU into an illegal mode for AArch64,
tripping the BUG() in exception_target_el() during the next injection:
kernel BUG at arch/arm64/kvm/inject_fault.c:40!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT
Hardware name: linux,dummy-virt (DT)
pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : exception_target_el+0x88/0x8c
lr : pend_serror_exception+0x18/0x13c
sp : ffff800082f03a10
x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000
x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000
x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004
x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20
Call trace:
exception_target_el+0x88/0x8c (P)
kvm_inject_serror_esr+0x40/0x3b4
__kvm_arm_vcpu_set_events+0xf0/0x100
kvm_arch_vcpu_ioctl+0x180/0x9d4
kvm_vcpu_ioctl+0x60c/0x9f4
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xf0
el0t_
2025-10-30
—
info
CVE-2025-40101
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST
At the end of btrfs_load_block_group_zone_info() the first thing we do
is to ensure that if the mapping type is not a SINGLE one and there is
no RAID stripe tree, then we return early with an error.
Doing that, though, prevents the code from running the last calls from
this function which are about freeing memory allocated during its
run. Hence, in this case, instead of returning early, we set the ret
value and fall through the rest of the cleanup code.
2025-10-30
—
info
CVE-2025-40100
In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not assert we found block group item when creating free space tree
Currently, when building a free space tree at populate_free_space_tree(),
if we are not using the block group tree feature, we always expect to find
block group items (either extent items or a block group item with key type
BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with
btrfs_search_slot_for_read(), so we assert that we found an item. However
this expectation is wrong since we can have a new block group created in
the current transaction which is still empty and for which we still have
not added the block group's item to the extent tree, in which case we do
not have any items in the extent tree associated to the block group.
The insertion of a new block group's block group item in the extent tree
happens at btrfs_create_pending_block_groups() when it calls the helper
insert_block_group_item(). This typically is done when a transaction
handle is released, committed or when running delayed refs (either as
part of a transaction commit or when serving tickets for space reservation
if we are low on free space).
So remove the assertion at populate_free_space_tree() even when the block
group tree feature is not enabled and update the comment to mention this
case.
Syzbot reported this with the following stack trace:
BTRFS info (device loop3 state M): rebuilding free space tree
assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115
------------[ cut here ]------------
kernel BUG at fs/btrfs/free-space-tree.c:1115!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115
Code: ff ff e8 d3 (...)
RSP: 0018:ffffc9000430f780 EFLAGS: 00010246
RAX: 00
2025-10-30
—
info
CVE-2025-40099
In the Linux kernel, the following vulnerability has been resolved:
cifs: parse_dfs_referrals: prevent oob on malformed input
Malicious SMB server can send invalid reply to FSCTL_DFS_GET_REFERRALS
- reply smaller than sizeof(struct get_dfs_referral_rsp)
- reply with number of referrals smaller than NumberOfReferrals in the
header
Processing of such replies will cause oob.
Return -EINVAL error on such replies to prevent oob-s.
2025-10-30
—
info
CVE-2025-40098
In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_get_acpi_mute_state()
Return value of a function acpi_evaluate_dsm() is dereferenced without
checking for NULL, but it is usually checked for this function.
acpi_evaluate_dsm() may return NULL, when acpi_evaluate_object() returns
acpi_status other than ACPI_SUCCESS, so add a check to prevent the crach.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
2025-10-30
—
info
CVE-2025-40097
In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda: Fix missing pointer check in hda_component_manager_init function
The __component_match_add function may assign the 'matchptr' pointer
the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced.
The call stack leading to the error looks like this:
hda_component_manager_init
|-> component_match_add
|-> component_match_add_release
|-> __component_match_add ( ... ,**matchptr, ... )
|-> *matchptr = ERR_PTR(-ENOMEM); // assign
|-> component_master_add_with_match( ... match)
|-> component_match_realloc(match, match->num); // dereference
Add IS_ERR() check to prevent the crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
2025-10-30
—
info
CVE-2025-40096
In the Linux kernel, the following vulnerability has been resolved:
drm/sched: Fix potential double free in drm_sched_job_add_resv_dependencies
When adding dependencies with drm_sched_job_add_dependency(), that
function consumes the fence reference both on success and failure, so in
the latter case the dma_fence_put() on the error path (xarray failed to
expand) is a double free.
Interestingly this bug appears to have been present ever since
commit ebd5f74255b9 ("drm/sched: Add dependency tracking"), since the code
back then looked like this:
drm_sched_job_add_implicit_dependencies():
...
for (i = 0; i < fence_count; i++) {
ret = drm_sched_job_add_dependency(job, fences[i]);
if (ret)
break;
}
for (; i < fence_count; i++)
dma_fence_put(fences[i]);
Which means for the failing 'i' the dma_fence_put was already a double
free. Possibly there were no users at that time, or the test cases were
insufficient to hit it.
The bug was then only noticed and fixed after
commit 9c2ba265352a ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")
landed, with its fixup of
commit 4eaf02d6076c ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies").
At that point it was a slightly different flavour of a double free, which
commit 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
noticed and attempted to fix.
But it only moved the double free from happening inside the
drm_sched_job_add_dependency(), when releasing the reference not yet
obtained, to the caller, when releasing the reference already released by
the former in the failure case.
As such it is not easy to identify the right target for the fixes tag so
lets keep it simple and just continue the chain.
While fixing we also improve the comment and explain the reason for taking
the reference and not dropping it.
2025-10-30
—
info
CVE-2025-40095
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_rndis: Refactor bind path to use __free()
After an bind/unbind cycle, the rndis->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
2025-10-30
—
info
CVE-2025-40094
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_acm: Refactor bind path to use __free()
After an bind/unbind cycle, the acm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
gs_free_req+0x30/0x44
acm_bind+0x1b8/0x1f4
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
2025-10-30
—
info
CVE-2025-40093
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ecm: Refactor bind path to use __free()
After an bind/unbind cycle, the ecm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
2025-10-30
—
info
CVE-2025-40092
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Refactor bind path to use __free()
After an bind/unbind cycle, the ncm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
ncm_bind+0x39c/0x3dc
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
2025-10-30
—
info
CVE-2025-40091
In the Linux kernel, the following vulnerability has been resolved:
ixgbe: fix too early devlink_free() in ixgbe_remove()
Since ixgbe_adapter is embedded in devlink, calling devlink_free()
prematurely in the ixgbe_remove() path can lead to UAF. Move devlink_free()
to the end.
KASAN report:
BUG: KASAN: use-after-free in ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe]
Read of size 8 at addr ffff0000adf813e0 by task bash/2095
CPU: 1 UID: 0 PID: 2095 Comm: bash Tainted: G S 6.17.0-rc2-tnguy.net-queue+ #1 PREEMPT(full)
[...]
Call trace:
show_stack+0x30/0x90 (C)
dump_stack_lvl+0x9c/0xd0
print_address_description.constprop.0+0x90/0x310
print_report+0x104/0x1f0
kasan_report+0x88/0x180
__asan_report_load8_noabort+0x20/0x30
ixgbe_reset_interrupt_capability+0x140/0x180 [ixgbe]
ixgbe_clear_interrupt_scheme+0xf8/0x130 [ixgbe]
ixgbe_remove+0x2d0/0x8c0 [ixgbe]
pci_device_remove+0xa0/0x220
device_remove+0xb8/0x170
device_release_driver_internal+0x318/0x490
device_driver_detach+0x40/0x68
unbind_store+0xec/0x118
drv_attr_store+0x64/0xb8
sysfs_kf_write+0xcc/0x138
kernfs_fop_write_iter+0x294/0x440
new_sync_write+0x1fc/0x588
vfs_write+0x480/0x6a0
ksys_write+0xf0/0x1e0
__arm64_sys_write+0x70/0xc0
invoke_syscall.constprop.0+0xcc/0x280
el0_svc_common.constprop.0+0xa8/0x248
do_el0_svc+0x44/0x68
el0_svc+0x54/0x160
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1b0/0x1b8
2025-10-30
—
info
CVE-2025-40090
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix recursive locking in RPC handle list access
Since commit 305853cce3794 ("ksmbd: Fix race condition in RPC handle list
access"), ksmbd_session_rpc_method() attempts to lock sess->rpc_lock.
This causes hung connections / tasks when a client attempts to open
a named pipe. Using Samba's rpcclient tool:
$ rpcclient //192.168.1.254 -U user%password
$ rpcclient $> srvinfo
<connection hung here>
Kernel side:
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:0 state:D stack:0 pid:5021 tgid:5021 ppid:2 flags:0x00200000
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
__schedule from schedule+0x3c/0x58
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from rwsem_down_read_slowpath+0x1b0/0x1d8
rwsem_down_read_slowpath from down_read+0x28/0x30
down_read from ksmbd_session_rpc_method+0x18/0x3c
ksmbd_session_rpc_method from ksmbd_rpc_open+0x34/0x68
ksmbd_rpc_open from ksmbd_session_rpc_open+0x194/0x228
ksmbd_session_rpc_open from create_smb2_pipe+0x8c/0x2c8
create_smb2_pipe from smb2_open+0x10c/0x27ac
smb2_open from handle_ksmbd_work+0x238/0x3dc
handle_ksmbd_work from process_scheduled_works+0x160/0x25c
process_scheduled_works from worker_thread+0x16c/0x1e8
worker_thread from kthread+0xa8/0xb8
kthread from ret_from_fork+0x14/0x38
Exception stack(0x8529ffb0 to 0x8529fff8)
The task deadlocks because the lock is already held:
ksmbd_session_rpc_open
down_write(&sess->rpc_lock)
ksmbd_rpc_open
ksmbd_session_rpc_method
down_read(&sess->rpc_lock) <-- deadlock
Adjust ksmbd_session_rpc_method() callers to take the lock when necessary.
2025-10-30
—
info
CVE-2025-40089
In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Add check for no entries in cxl_feature_info
cxl EDAC calls cxl_feature_info() to get the feature information and
if the hardware has no Features support, cxlfs may be passed in as
NULL.
[ 51.957498] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 51.965571] #PF: supervisor read access in kernel mode
[ 51.971559] #PF: error_code(0x0000) - not-present page
[ 51.977542] PGD 17e4f6067 P4D 0
[ 51.981384] Oops: Oops: 0000 [#1] SMP NOPTI
[ 51.986300] CPU: 49 UID: 0 PID: 3782 Comm: systemd-udevd Not tainted 6.17.0dj
test+ #64 PREEMPT(voluntary)
[ 51.997355] Hardware name: <removed>
[ 52.009790] RIP: 0010:cxl_feature_info+0xa/0x80 [cxl_core]
Add a check for cxlfs before dereferencing it and return -EOPNOTSUPP if
there is no cxlfs created due to no hardware support.
2025-10-30
—
info
CVE-2025-40088
In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix slab-out-of-bounds read in hfsplus_strcasecmp()
The hfsplus_strcasecmp() logic can trigger the issue:
[ 117.317703][ T9855] ==================================================================
[ 117.318353][ T9855] BUG: KASAN: slab-out-of-bounds in hfsplus_strcasecmp+0x1bc/0x490
[ 117.318991][ T9855] Read of size 2 at addr ffff88802160f40c by task repro/9855
[ 117.319577][ T9855]
[ 117.319773][ T9855] CPU: 0 UID: 0 PID: 9855 Comm: repro Not tainted 6.17.0-rc6 #33 PREEMPT(full)
[ 117.319780][ T9855] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 117.319783][ T9855] Call Trace:
[ 117.319785][ T9855] <TASK>
[ 117.319788][ T9855] dump_stack_lvl+0x1c1/0x2a0
[ 117.319795][ T9855] ? __virt_addr_valid+0x1c8/0x5c0
[ 117.319803][ T9855] ? __pfx_dump_stack_lvl+0x10/0x10
[ 117.319808][ T9855] ? rcu_is_watching+0x15/0xb0
[ 117.319816][ T9855] ? lock_release+0x4b/0x3e0
[ 117.319821][ T9855] ? __kasan_check_byte+0x12/0x40
[ 117.319828][ T9855] ? __virt_addr_valid+0x1c8/0x5c0
[ 117.319835][ T9855] ? __virt_addr_valid+0x4a5/0x5c0
[ 117.319842][ T9855] print_report+0x17e/0x7e0
[ 117.319848][ T9855] ? __virt_addr_valid+0x1c8/0x5c0
[ 117.319855][ T9855] ? __virt_addr_valid+0x4a5/0x5c0
[ 117.319862][ T9855] ? __phys_addr+0xd3/0x180
[ 117.319869][ T9855] ? hfsplus_strcasecmp+0x1bc/0x490
[ 117.319876][ T9855] kasan_report+0x147/0x180
[ 117.319882][ T9855] ? hfsplus_strcasecmp+0x1bc/0x490
[ 117.319891][ T9855] hfsplus_strcasecmp+0x1bc/0x490
[ 117.319900][ T9855] ? __pfx_hfsplus_cat_case_cmp_key+0x10/0x10
[ 117.319906][ T9855] hfs_find_rec_by_key+0xa9/0x1e0
[ 117.319913][ T9855] __hfsplus_brec_find+0x18e/0x470
[ 117.319920][ T9855] ? __pfx_hfsplus_bnode_find+0x10/0x10
[ 117.319926][ T9855] ? __pfx_hfs_find_rec_by_key+0x10/0x10
[ 117.319933][ T9855] ? __pfx___hfsplus_brec_find+0x10/0x10
[ 117.319942][ T985
2025-10-30
—
info
CVE-2025-40087
In the Linux kernel, the following vulnerability has been resolved:
NFSD: Define a proc_layoutcommit for the FlexFiles layout type
Avoid a crash if a pNFS client should happen to send a LAYOUTCOMMIT
operation on a FlexFiles layout.
2025-10-30
—
info
CVE-2025-40086
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Don't allow evicting of BOs in same VM in array of VM binds
An array of VM binds can potentially evict other buffer objects (BOs)
within the same VM under certain conditions, which may lead to NULL
pointer dereferences later in the bind pipeline. To prevent this, clear
the allow_res_evict flag in the xe_bo_validate call.
v2:
- Invert polarity of no_res_evict (Thomas)
- Add comment in code explaining issue (Thomas)
(cherry picked from commit 8b9ba8d6d95fe75fed6b0480bb03da4b321bea08)
2025-10-30
—
6.5
CVE-2025-54471
NeuVector used a hard-coded cryptographic key embedded in the source
code. At compilation time, the key value was replaced with the secret
key value and used to encrypt sensitive configurations when NeuVector
stores the data.
2025-10-30
—
info
CVE-2025-54941
An example dag `example_dag_decorator` had non-validated parameter that allowed the UI user to redirect the example to a malicious server and execute code on worker. This however required that the example dags are enabled in production (not default) or the example dag code copied to build your own similar dag. If you used the `example_dag_decorator` please review it and apply the changes implemented in Airflow 3.0.5 accordingly.
2025-10-30
—
9.9
CVE-2025-54469
A vulnerability was identified in NeuVector, where the enforcer used environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT to generate a command to be executed via popen, without first sanitising their values.
The entry process of the enforcer container is the monitor
process. When the enforcer container stops, the monitor process checks
whether the consul subprocess has exited. To perform this check, the
monitor process uses the popen function to execute a shell command that determines whether the ports used by the consul subprocess are still active.
The values of environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT
are used directly to compose shell commands via popen without
validation or sanitization. This behavior could allow a malicious user
to inject malicious commands through these variables within the enforcer
container.
2025-10-30
—
8.6
CVE-2025-54470
This vulnerability affects NeuVector deployments only when the Report anonymous cluster data option is enabled. When this option is enabled, NeuVector sends anonymous telemetry data to the telemetry server.
In affected versions, NeuVector does not enforce TLS
certificate verification when transmitting anonymous cluster data to the
telemetry server. As a result, the communication channel is susceptible
to man-in-the-middle (MITM) attacks, where an attacker could intercept
or modify the transmitted data. Additionally, NeuVector loads the
response of the telemetry server is loaded into memory without size
limitation, which makes it vulnerable to a Denial of Service(DoS)
attack
2025-10-30
—
info
CVE-2025-62402
API users via `/api/v2/dagReports` could perform Dag code execution in the context of the api-server if the api-server was deployed in the environment where Dag files were available.
2025-10-30
—
info
CVE-2025-62503
User with CREATE and no UPDATE privilege for Pools, Connections, Variables could update existing records via bulk create API with overwrite action.
2025-10-30
—
6.7
CVE-2025-11906
A vulnerability exists in Progress Flowmon versions prior 12.5.6 where certain system configuration files have incorrect file permissions, allowing a user with access to the default flowmon system user account used for SSH access to potentially escalate privileges to root during service initialization.
2025-10-30
—
5.3
CVE-2025-11881
The AppPresser – Mobile App Framework plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the 'myappp_verify' function in all versions up to, and including, 4.5.0. This makes it possible for unauthenticated attackers to extract sensitive data including plugin and theme names and version numbers, which can be used to facilitate targeted attacks against outdated or vulnerable components.
2025-10-30
—
info
CVE-2025-10636
The NS Maintenance Mode for WP WordPress plugin through 1.3.1 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).
2025-10-30
—
7.3
CVE-2025-62229
A flaw was found in the X.Org X server and Xwayland when processing X11 Present extension notifications. Improper error handling during notification creation can leave dangling pointers that lead to a use-after-free condition. This can cause memory corruption or a crash, potentially allowing an attacker to execute arbitrary code or cause a denial of service.
2025-10-30
—
5.3
CVE-2025-10008
The Translate WordPress and go Multilingual – Weglot plugin for WordPress is vulnerable to unauthorized loss of data due to a missing capability check on the 'clean_options' function in all versions up to, and including, 5.1. This makes it possible for unauthenticated attackers to delete limited transients that contain cached plugin options.
2025-10-30
—
6.5
CVE-2025-11627
The Site Checkup Debug AI Troubleshooting with Wizard and Tips for Each Issue plugin for WordPress is vulnerable to log file poisoning in all versions up to, and including, 1.47. This makes it possible for unauthenticated attackers to insert arbitrary content into log files, and potentially cause denial of service via disk space exhaustion.
2025-10-30
—
7.3
CVE-2025-62230
A flaw was discovered in the X.Org X server’s X Keyboard (Xkb) extension when handling client resource cleanup. The software frees certain data structures without properly detaching related resources, leading to a use-after-free condition. This can cause memory corruption or a crash when affected clients disconnect.
2025-10-30
—
7.3
CVE-2025-62231
A flaw was identified in the X.Org X server’s X Keyboard (Xkb) extension where improper bounds checking in the XkbSetCompatMap() function can cause an unsigned short overflow. If an attacker sends specially crafted input data, the value calculation may overflow, leading to memory corruption or a crash.
2025-10-30
—
6.4
CVE-2025-12475
The Blocksy Companion plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'blocksy_newsletter_subscribe' shortcode in all versions up to, and including, 2.1.14 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
2025-10-30
—
info
CVE-2025-50736
An open redirect vulnerability exists in Byaidu PDFMathTranslate v1.9.9 that allows attackers to craft URLs that cause the application to redirect users to arbitrary external websites via the file parameter to the /gradio_api endpoint. This vulnerability could be exploited for phishing attacks or to bypass security filters.
2025-10-30
—
info
CVE-2025-50739
iib0011 omni-tools v0.4.0 is vulnerable to remote code execution via unsafe JSON deserialization.
2025-10-30
—
info
CVE-2025-52179
Cross-site scripting (XSS) vulnerability in Zucchetti Ad Hoc Revolution 4.1 and earlier allows remote unauthenticated attackers to inject arbitrary JavaScript via the pHtmlSource parameter of the /ahrw/jsp/gsfr_feditorHTML.jsp endpoint.
2025-10-30
—
info
CVE-2025-52180
Cross-site scripting (XSS) vulnerability in Zucchetti Ad Hoc Infinity 4.2 and earlier allows remote unauthenticated attackers to inject arbitrary JavaScript via the pHtmlSource parameter of the /ahi/jsp/gsfr_feditorHTML.jsp?pHtmlSource endpoint.
2025-10-30
—
info
CVE-2025-57109
Kitware VTK (Visualization Toolkit) 9.5.0 is vulnerable to Heap Use-After-Free in vtkGLTFImporter::ImportActors. When processing GLTF files with invalid scene node references, the application accesses string members of mesh objects that have been previously freed during actor import operations.
2025-10-30
—
info
CVE-2025-61115
ABC Fine Wine & Spirits Android App version v.11.27.5 and before (package name com.cta.abcfinewineandspirits), developed by ABC Liquors, Inc., contains an improper access control vulnerability in its login mechanism. The application does not properly validate user passwords during authentication, allowing attackers to bypass login checks and obtain valid session identifiers. Successful exploitation could result in unauthorized account access, privacy breaches, and misuse of the platform.
2025-10-30
—
info
CVE-2025-63608
A SQL injection vulnerability exists in CSZ-CMS <=1.3.0 in the Form Builder view functionality. The vulnerability is located in the field parameter of the form viewing feature, allowing authenticated administrators to execute arbitrary SQL queries.
2025-10-30
—
info
CVE-2025-61116
AdForest - Classified Android App version 4.0.12 (package name scriptsbundle.adforest), developed by Muhammad Jawad Arshad, contains an improper access control vulnerability in its authentication mechanism. The app uses a Base64-encoded email address as the authorization credential, which can be manipulated by attackers to gain unauthorized access to user accounts. Successful exploitation could result in account compromise, privacy breaches, and misuse of the platform.
2025-10-30
—
info
CVE-2025-61196
An issue in BusinessNext CRMnext v.10.8.3.0 allows a remote attacker to execute arbitrary code via the comments input parameter.
2025-10-30
—
info
CVE-2025-63885
A stored cross-site scripting (XSS) vulnerability in AIxBlock commit 04f305 allows attackers to execute arbitrary web scripts or HTML via injecting a crafted payload into the model_desc field.
2025-10-30
—
info
CVE-2025-50574
Cross-site scripting (XSS) vulnerability in blog-details.php in Hiruna Gallage's Glamour Salon Management System v1 allows remote attackers to inject arbitrary web script or HTML via the blog comment section parameter.
2025-10-30
—
info
CVE-2025-61141
sqls-server/sqls 0.2.28 is vulnerable to command injection in the config command because the openEditor function passes the EDITOR environment variable and config file path to sh -c without sanitization, allowing attackers to execute arbitrary commands.
2025-10-30
—
info
CVE-2025-61121
Mobile Scanner Android App version 2.12.38 (package name com.glority.everlens), developed by Glority Global Group Ltd., contains a credential leakage vulnerability. Improper handling of cloud service credentials may allow attackers to obtain them and carry out unauthorized actions, such as sensitive information disclosure and abuse of cloud resources. Successful exploitation could result in privacy breaches and misuse of the platform infrastructure.
2025-10-30
—
info
CVE-2025-61120
AG Life Logger Android App version v1.0.2.72 and before (package name com.donki.healthy), developed by IO FIT, K.K., contains improper access control vulnerabilities. Exposed credentials in traffic may allow attackers to misuse cloud resources, and predictable verification codes make brute-force account logins feasible. Successful exploitation could result in account compromise, privacy breaches, and abuse of cloud resources.
2025-10-30
—
info
CVE-2025-63422
Incorrect access control in the Web management interface in Each Italy Wireless Mini Router WIRELESS-N 300M v28K.MiniRouter.20190211 allows attackers to arbitrarily change the administrator username and password via sending a crafted GET request.
2025-10-30
—