CVEs

In the Linux kernel, the following vulnerability has been resolved: comedi: c6xdigio: Fix invalid PNP driver unregistration The Comedi low-level driver "c6xdigio" seems to be for a parallel port connected device. When the Comedi core calls the driver's Comedi "attach" handler `c6xdigio_attach()` to configure a Comedi to use this driver, it tries to enable the parallel port PNP resources by registering a PNP driver with `pnp_register_driver()`, but ignores the return value. (The `struct pnp_driver` it uses has only the `name` and `id_table` members filled in.) The driver's Comedi "detach" handler `c6xdigio_detach()` unconditionally unregisters the PNP driver with `pnp_unregister_driver()`. It is possible for `c6xdigio_attach()` to return an error before it calls `pnp_register_driver()` and it is possible for the call to `pnp_register_driver()` to return an error (that is ignored). In both cases, the driver should not be calling `pnp_unregister_driver()` as it does in `c6xdigio_detach()`. (Note that `c6xdigio_detach()` will be called by the Comedi core if `c6xdigio_attach()` returns an error, or if the Comedi core decides to detach the Comedi device from the driver for some other reason.) The unconditional call to `pnp_unregister_driver()` without a previous successful call to `pnp_register_driver()` will cause `driver_unregister()` to issue a warning "Unexpected driver unregister!". This was detected by Syzbot [1]. Also, the PNP driver registration and unregistration should be done at module init and exit time, respectively, not when attaching or detaching Comedi devices to the driver. (There might be more than one Comedi device being attached to the driver, although that is unlikely.) Change the driver to do the PNP driver registration at module init time, and the unregistration at module exit time. Since `c6xdigio_detach()` now only calls `comedi_legacy_detach()`, remove the function and change the Comedi driver "detach" handler to `comedi_legacy_deta

In the Linux kernel, the following vulnerability has been resolved: usb: uas: fix urb unmapping issue when the uas device is remove during ongoing data transfer When a UAS device is unplugged during data transfer, there is a probability of a system panic occurring. The root cause is an access to an invalid memory address during URB callback handling. Specifically, this happens when the dma_direct_unmap_sg() function is called within the usb_hcd_unmap_urb_for_dma() interface, but the sg->dma_address field is 0 and the sg data structure has already been freed. The SCSI driver sends transfer commands by invoking uas_queuecommand_lck() in uas.c, using the uas_submit_urbs() function to submit requests to USB. Within the uas_submit_urbs() implementation, three URBs (sense_urb, data_urb, and cmd_urb) are sequentially submitted. Device removal may occur at any point during uas_submit_urbs execution, which may result in URB submission failure. However, some URBs might have been successfully submitted before the failure, and uas_submit_urbs will return the -ENODEV error code in this case. The current error handling directly calls scsi_done(). In the SCSI driver, this eventually triggers scsi_complete() to invoke scsi_end_request() for releasing the sgtable. The successfully submitted URBs, when being unlinked to giveback, call usb_hcd_unmap_urb_for_dma() in hcd.c, leading to exceptions during sg unmapping operations since the sg data structure has already been freed. This patch modifies the error condition check in the uas_submit_urbs() function. When a UAS device is removed but one or more URBs have already been successfully submitted to USB, it avoids immediately invoking scsi_done() and save the cmnd to devinfo->cmnd array. If the successfully submitted URBs is completed before devinfo->resetting being set, then the scsi_done() function will be called within uas_try_complete() after all pending URB operations are finalized. Otherwise, the scsi_done() function will be c

In the Linux kernel, the following vulnerability has been resolved: iio: accel: bmc150: Fix irq assumption regression The code in bmc150-accel-core.c unconditionally calls bmc150_accel_set_interrupt() in the iio_buffer_setup_ops, such as on the runtime PM resume path giving a kernel splat like this if the device has no interrupts: Unable to handle kernel NULL pointer dereference at virtual address 00000001 when read PC is at bmc150_accel_set_interrupt+0x98/0x194 LR is at __pm_runtime_resume+0x5c/0x64 (...) Call trace: bmc150_accel_set_interrupt from bmc150_accel_buffer_postenable+0x40/0x108 bmc150_accel_buffer_postenable from __iio_update_buffers+0xbe0/0xcbc __iio_update_buffers from enable_store+0x84/0xc8 enable_store from kernfs_fop_write_iter+0x154/0x1b4 This bug seems to have been in the driver since the beginning, but it only manifests recently, I do not know why. Store the IRQ number in the state struct, as this is a common pattern in other drivers, then use this to determine if we have IRQ support or not.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix WARN_ON in tracing_buffers_mmap_close for split VMAs When a VMA is split (e.g., by partial munmap or MAP_FIXED), the kernel calls vm_ops->close on each portion. For trace buffer mappings, this results in ring_buffer_unmap() being called multiple times while ring_buffer_map() was only called once. This causes ring_buffer_unmap() to return -ENODEV on subsequent calls because user_mapped is already 0, triggering a WARN_ON. Trace buffer mappings cannot support partial mappings because the ring buffer structure requires the complete buffer including the meta page. Fix this by adding a may_split callback that returns -EINVAL to prevent VMA splits entirely.

In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-svc: fix bug in saving controller data Fix the incorrect usage of platform_set_drvdata and dev_set_drvdata. They both are of the same data and overrides each other. This resulted in the rmmod of the svc driver to fail and throw a kernel panic for kthread_stop and fifo free.

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Fix synchronous external abort on unbind A synchronous external abort occurs on the Renesas RZ/G3S SoC if unbind is executed after the configuration sequence described above: modprobe usb_f_ecm modprobe libcomposite modprobe configfs cd /sys/kernel/config/usb_gadget mkdir -p g1 cd g1 echo "0x1d6b" > idVendor echo "0x0104" > idProduct mkdir -p strings/0x409 echo "0123456789" > strings/0x409/serialnumber echo "Renesas." > strings/0x409/manufacturer echo "Ethernet Gadget" > strings/0x409/product mkdir -p functions/ecm.usb0 mkdir -p configs/c.1 mkdir -p configs/c.1/strings/0x409 echo "ECM" > configs/c.1/strings/0x409/configuration if [ ! -L configs/c.1/ecm.usb0 ]; then ln -s functions/ecm.usb0 configs/c.1 fi echo 11e20000.usb > UDC echo 11e20000.usb > /sys/bus/platform/drivers/renesas_usbhs/unbind The displayed trace is as follows: Internal error: synchronous external abort: 0000000096000010 [#1] SMP CPU: 0 UID: 0 PID: 188 Comm: sh Tainted: G M 6.17.0-rc7-next-20250922-00010-g41050493b2bd #55 PREEMPT Tainted: [M]=MACHINE_CHECK Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usbhs_sys_function_pullup+0x10/0x40 [renesas_usbhs] lr : usbhsg_update_pullup+0x3c/0x68 [renesas_usbhs] sp : ffff8000838b3920 x29: ffff8000838b3920 x28: ffff00000d585780 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000c3e3810 x23: ffff00000d5e5c80 x22: ffff00000d5e5d40 x21: 0000000000000000 x20: 0000000000000000 x19: ffff00000d5e5c80 x18: 0000000000000020 x17: 2e30303230316531 x16: 312d7968703a7968 x15: 3d454d414e5f4344 x14: 000000000000002c x13: 0000000000000000 x12: 0000000000000000 x11: ffff00000f358f38 x10: ffff00000f358db0 x9 : ffff00000b41f418 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 000000004b5ccb9d x3 :

In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Fix stack_depot usage Add missing stack_depot_init() call when CONFIG_DRM_XE_DEBUG_GUC is enabled to fix the following call stack: [] BUG: kernel NULL pointer dereference, address: 0000000000000000 [] Workqueue: drm_sched_run_job_work [gpu_sched] [] RIP: 0010:stack_depot_save_flags+0x172/0x870 [] Call Trace: [] <TASK> [] fast_req_track+0x58/0xb0 [xe] (cherry picked from commit 64fdf496a6929a0a194387d2bb5efaf5da2b542f)

A Use of Uninitialized Variable vulnerability exists in Open Design Alliance Drawings SDK static versions (mt) before 2026.12. Static object `COdaMfcAppApp theApp` may access `OdString::kEmpty` before its initialization. Due to undefined initialization order of static objects across translation units (Static Initialization Order Fiasco), the application accesses uninitialized memory. This results in application crash on startup, causing denial of service. Due to undefined behavior,  memory corruption and potential arbitrary code execution cannot be ruled out in specific exploitation scenarios.

Authentication issue that does not verify the source of a packet which could allow an attacker to create a denial-of-service condition or modify the configuration of the device.

Use of a weak pseudo-random number generator, which may allow an attacker to read or inject encrypted PowerG packets.

Unquoted Search Path or Element vulnerability in NetBT Consulting Services Inc. E-Fatura allows Leveraging/Manipulating Configuration File Search Paths, Redirect Access to Libraries.This issue affects e-Fatura: before 1.2.15.

Mattermost versions 11.1.x <= 11.1.0, 11.0.x <= 11.0.5, 10.12.x <= 10.12.3, 10.11.x <= 10.11.7 with the Jira plugin enabled and Mattermost Jira plugin versions <=4.4.0 fail to enforce authentication and issue-key path restrictions in the Jira plugin, which allows an unauthenticated attacker who knows a valid user ID to issue authenticated GET and POST requests to the Jira server via crafted plugin payloads that spoof the user ID and inject arbitrary issue key paths. Mattermost Advisory ID: MMSA-2025-00555

Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Centreon Infra Monitoring (Hostgroup configuration page) allows Stored XSS by users with elevated privileges.This issue affects Infra Monitoring: from 24.10.0 before 24.10.15, from 24.04.0 before 24.04.19, from 23.10.0 before 23.10.29.

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Centreon Infra Monitoring - Open-tickets (Notification rules configuration parameters, Open tickets modules) allows SQL Injection to user with elevated privileges.This issue affects Infra Monitoring - Open-tickets: from 24.10.0 before 24.10.5, from 24.04.0 before 24.04.5, from 23.10.0 before 23.10.4.

Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Centreon Infra Monitoring (Notification rules, Open tickets module) allows Stored XSS by users with elevated privileges.This issue affects Infra Monitoring: from 24.10.0 before 24.10.5, from 24.04.0 before 24.04.5, from 23.10.0 before 23.10.4.

Due to Nonce reuse, attackers can perform reply attack or decrypt captured packets.

Under certain circumstances, attacker can capture the network key, read or write encrypted packets on the PowerG network.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in voidthemes Void Elementor WHMCS Elements For Elementor Page Builder void-elementor-whmcs-elements.This issue affects Void Elementor WHMCS Elements For Elementor Page Builder: from n/a through <= 2.0.1.2.

Cross-Site Request Forgery (CSRF) vulnerability in PluginOps Feather Login Page feather-login-page allows Cross Site Request Forgery.This issue affects Feather Login Page: from n/a through <= 1.1.7.

Cross-Site Request Forgery (CSRF) vulnerability in Kunal Custom 404 Pro custom-404-pro allows Cross Site Request Forgery.This issue affects Custom 404 Pro: from n/a through <= 3.12.0.

An authenticated local user can obtain information that allows claiming security policy rules of another user due to sensitive information being printed in plaintext in Identity Agent for Terminal Services debug files.

An authenticated local user can obtain information that allows claiming security policy rules of another user due to sensitive information being accessible in the Windows Registry keys for Check Point Identity Agent running on a Terminal Server.

Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in Sharp Display Solutions projectors allows a attacker may improperly access the HTTP server and execute arbitrary actions.

Improper Validation of Integrity Check Value vulnerability in Sharp Display Solutions projectors allows a attacker may create and run unauthorized firmware.

Improper Validation of Integrity Check Value vulnerability in Sharp Display Solutions projectors allows a attacker may create and run unauthorized firmware.

Stack-based Buffer Overflow vulnerability in Sharp Display Solutions projectors allows a attacker may execute arbitrary commands and programs.

Stack-based Buffer Overflow vulnerability in Sharp Display Solutions projectors allows a attacker may execute arbitrary commands and programs.

Path Traversal vulnerability in Sharp Display Solutions projectors allows a attacker may access and read any files within the projector.

Missing Authentication for Critical Function vulnerability in Sharp Display Solutions Media Player MP-01 All Verisons allows a attacker may access to the web interface of the affected product without authentication and change settings or perform other operations, and deliver content from the authoring software to the affected product without authentication.

A security flaw has been discovered in loganhong php loganSite up to c035fb5c3edd0b2a5e32fd4051cbbc9e61a31426. This affects an unknown function of the file /includes/article_detail.php of the component Article Handler. Performing manipulation of the argument ID results in sql injection. It is possible to initiate the attack remotely. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available.

A vulnerability was identified in floooh sokol up to 5d11344150973f15e16d3ec4ee7550a73fb995e0. The impacted element is the function _sg_validate_pipeline_desc in the library sokol_gfx.h. Such manipulation leads to stack-based buffer overflow. The attack must be carried out locally. The exploit is publicly available and might be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The name of the patch is b95c5245ba357967220c9a860c7578a7487937b0. It is best practice to apply a patch to resolve this issue.

A vulnerability was determined in code-projects Refugee Food Management System 1.0. The affected element is an unknown function of the file /home/home.php. This manipulation of the argument a causes sql injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in code-projects Simple Stock System 1.0. Impacted is an unknown function of the file /logout.php. The manipulation of the argument uname results in sql injection. The attack can be executed remotely. The exploit has been made public and could be used.

Enterprise Cloud Database developed by Ragic has a Hard-coded Cryptographic Key vulnerability, allowing unauthenticated remote attackers to exploit the fixed key to generate verification information and log into the system as any user.

Enterprise Cloud Database developed by Ragic has a Arbitrary File Read vulnerability, allowing unauthenticated remote attackers to exploit Relative Path Traversal to download arbitrary system files.

A vulnerability has been found in Tenda WH450 1.0.0.18. This issue affects some unknown processing of the file /goform/SafeUrlFilter. The manipulation of the argument page leads to stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

Delta Electronics DVP15MC11T lacks proper validation of the modbus/tcp packets and can lead to denial of service.

A flaw has been found in liweiyi ChestnutCMS up to 1.5.8. This vulnerability affects the function FilenameUtils.getExtension of the file /dev-api/common/upload of the component Filename Handler. Executing manipulation of the argument File can lead to unrestricted upload. The attack may be launched remotely. The exploit has been published and may be used.

A vulnerability was detected in Tenda WH450 1.0.0.18. This affects an unknown part of the file /goform/L7Port of the component HTTP Request Handler. Performing a manipulation of the argument page results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

A security vulnerability has been detected in Tenda WH450 1.0.0.18. Affected by this issue is some unknown functionality of the file /goform/L7Im of the component HTTP Request Handler. Such manipulation of the argument page leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

A weakness has been identified in Tenda WH450 1.0.0.18. Affected by this vulnerability is an unknown functionality of the file /goform/CheckTools of the component HTTP Request Handler. This manipulation of the argument ipaddress causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in CouchCMS up to 2.4. Affected is an unknown function of the file couch/config.example.php of the component reCAPTCHA Handler. The manipulation of the argument K_RECAPTCHA_SITE_KEY/K_RECAPTCHA_SECRET_KEY results in use of hard-coded cryptographic key . It is possible to launch the attack remotely. This attack is characterized by high complexity. The exploitability is told to be difficult. The exploit has been released to the public and may be used for attacks.

A vulnerability was identified in DedeCMS up to 5.7.118. This impacts an unknown function of the file /freelist_main.php. The manipulation of the argument orderby leads to sql injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.

Authentication bypass vulnerability in Xiongmai XM530 IP cameras on Firmware V5.00.R02.000807D8.10010.346624.S.ONVIF 21.06 allows unauthenticated remote attackers to access sensitive device information and live video streams. The ONVIF implementation fails to enforce authentication on 31 critical endpoints, enabling direct unauthorized video stream access.

A reflected cross-site scripting (XSS) vulnerability exists in FuguHub 8.1 when serving SVG files through the /fs/ file manager interface. FuguHub does not sanitize or restrict script execution inside SVG content. When a victim opens a crafted SVG containing an inline <script> element, the browser executes the attacker-controlled JavaScript.

Reflected cross-site scripting (XSS) vulnerability in ClinCapture EDC 3.0 and 2.2.3, allowing an unauthenticated remote attacker to execute JavaScript code in the context of the victim's browser.

LSC Smart Connect Indoor IP Camera 1.4.13 contains a RCE vulnerability in start_app.sh.

An issue was discovered in Xiongmai XM530 IP cameras on firmware V5.00.R02.000807D8.10010.346624.S.ONVIF 21.06. The GetStreamUri exposes RTSP URIs containing hardcoded credentials enabling direct unauthorized video stream access.

Incorrect access control in the /api/v1/conversations/*/files API of GT Edge AI Platform before v2.0.10 allows unauthorized attackers to access other users' uploaded files.

Insecure permissions in the /api/v1/agents API of GT Edge AI Platform before v2.0.10-dev allows unauthorized attackers to access sensitive information.