CVEs

In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix reference count leak when using error routes with nexthop objects When a nexthop object is deleted, it is marked as dead and then fib_table_flush() is called to flush all the routes that are using the dead nexthop. The current logic in fib_table_flush() is to only flush error routes (e.g., blackhole) when it is called as part of network namespace dismantle (i.e., with flush_all=true). Therefore, error routes are not flushed when their nexthop object is deleted: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip route add 198.51.100.1/32 nhid 1 # ip route add blackhole 198.51.100.2/32 nhid 1 # ip nexthop del id 1 # ip route show blackhole 198.51.100.2 nhid 1 dev dummy1 As such, they keep holding a reference on the nexthop object which in turn holds a reference on the nexthop device, resulting in a reference count leak: # ip link del dev dummy1 [ 70.516258] unregister_netdevice: waiting for dummy1 to become free. Usage count = 2 Fix by flushing error routes when their nexthop is marked as dead. IPv6 does not suffer from this problem.

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Check for the presence of LS_NLA_TYPE_DGID correctly The netlink response for RDMA_NL_LS_OP_IP_RESOLVE should always have a LS_NLA_TYPE_DGID attribute, it is invalid if it does not. Use the nl parsing logic properly and call nla_parse_deprecated() to fill the nlattrs array and then directly index that array to get the data for the DGID. Just fail if it is NULL. Remove the for loop searching for the nla, and squash the validation and parsing into one function. Fixes an uninitialized read from the stack triggered by userspace if it does not provide the DGID to a kernel initiated RDMA_NL_LS_OP_IP_RESOLVE query. BUG: KMSAN: uninit-value in hex_byte_pack include/linux/hex.h:13 [inline] BUG: KMSAN: uninit-value in ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490 hex_byte_pack include/linux/hex.h:13 [inline] ip6_string+0xef4/0x13a0 lib/vsprintf.c:1490 ip6_addr_string+0x18a/0x3e0 lib/vsprintf.c:1509 ip_addr_string+0x245/0xee0 lib/vsprintf.c:1633 pointer+0xc09/0x1bd0 lib/vsprintf.c:2542 vsnprintf+0xf8a/0x1bd0 lib/vsprintf.c:2930 vprintk_store+0x3ae/0x1530 kernel/printk/printk.c:2279 vprintk_emit+0x307/0xcd0 kernel/printk/printk.c:2426 vprintk_default+0x3f/0x50 kernel/printk/printk.c:2465 vprintk+0x36/0x50 kernel/printk/printk_safe.c:82 _printk+0x17e/0x1b0 kernel/printk/printk.c:2475 ib_nl_process_good_ip_rsep drivers/infiniband/core/addr.c:128 [inline] ib_nl_handle_ip_res_resp+0x963/0x9d0 drivers/infiniband/core/addr.c:141 rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:-1 [inline] rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0xefa/0x11c0 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0xf04/0x12b0 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x10b3/0x1250 net/netlink/af_netlink.c:1896 sock_

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix the crash issue for zero copy XDP_TX action There is a crash issue when running zero copy XDP_TX action, the crash log is shown below. [ 216.122464] Unable to handle kernel paging request at virtual address fffeffff80000000 [ 216.187524] Internal error: Oops: 0000000096000144 [#1] SMP [ 216.301694] Call trace: [ 216.304130] dcache_clean_poc+0x20/0x38 (P) [ 216.308308] __dma_sync_single_for_device+0x1bc/0x1e0 [ 216.313351] stmmac_xdp_xmit_xdpf+0x354/0x400 [ 216.317701] __stmmac_xdp_run_prog+0x164/0x368 [ 216.322139] stmmac_napi_poll_rxtx+0xba8/0xf00 [ 216.326576] __napi_poll+0x40/0x218 [ 216.408054] Kernel panic - not syncing: Oops: Fatal exception in interrupt For XDP_TX action, the xdp_buff is converted to xdp_frame by xdp_convert_buff_to_frame(). The memory type of the resulting xdp_frame depends on the memory type of the xdp_buff. For page pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_ORDER0. However, stmmac_xdp_xmit_back() does not check the memory type and always uses the page pool type, this leads to invalid mappings and causes the crash. Therefore, check the xdp_buff memory type in stmmac_xdp_xmit_back() to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: net: usb: asix: validate PHY address before use The ASIX driver reads the PHY address from the USB device via asix_read_phy_addr(). A malicious or faulty device can return an invalid address (>= PHY_MAX_ADDR), which causes a warning in mdiobus_get_phy(): addr 207 out of range WARNING: drivers/net/phy/mdio_bus.c:76 Validate the PHY address in asix_read_phy_addr() and remove the now-redundant check in ax88172a.c.

In the Linux kernel, the following vulnerability has been resolved: e1000: fix OOB in e1000_tbi_should_accept() In e1000_tbi_should_accept() we read the last byte of the frame via 'data[length - 1]' to evaluate the TBI workaround. If the descriptor- reported length is zero or larger than the actual RX buffer size, this read goes out of bounds and can hit unrelated slab objects. The issue is observed from the NAPI receive path (e1000_clean_rx_irq): ================================================================== BUG: KASAN: slab-out-of-bounds in e1000_tbi_should_accept+0x610/0x790 Read of size 1 at addr ffff888014114e54 by task sshd/363 CPU: 0 PID: 363 Comm: sshd Not tainted 5.18.0-rc1 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x5a/0x74 print_address_description+0x7b/0x440 print_report+0x101/0x200 kasan_report+0xc1/0xf0 e1000_tbi_should_accept+0x610/0x790 e1000_clean_rx_irq+0xa8c/0x1110 e1000_clean+0xde2/0x3c10 __napi_poll+0x98/0x380 net_rx_action+0x491/0xa20 __do_softirq+0x2c9/0x61d do_softirq+0xd1/0x120 </IRQ> <TASK> __local_bh_enable_ip+0xfe/0x130 ip_finish_output2+0x7d5/0xb00 __ip_queue_xmit+0xe24/0x1ab0 __tcp_transmit_skb+0x1bcb/0x3340 tcp_write_xmit+0x175d/0x6bd0 __tcp_push_pending_frames+0x7b/0x280 tcp_sendmsg_locked+0x2e4f/0x32d0 tcp_sendmsg+0x24/0x40 sock_write_iter+0x322/0x430 vfs_write+0x56c/0xa60 ksys_write+0xd1/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f511b476b10 Code: 73 01 c3 48 8b 0d 88 d3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 2b 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 8e 9b 01 00 48 89 04 24 RSP: 002b:00007ffc9211d4e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000004024 RCX: 00007f511b476b10 RDX: 0000000000004024 RSI: 0000559a9385962c RDI: 0000000000000003 RBP: 0000559

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix OOB write in bnxt_re_copy_err_stats() Commit ef56081d1864 ("RDMA/bnxt_re: RoCE related hardware counters update") added three new counters and placed them after BNXT_RE_OUT_OF_SEQ_ERR. BNXT_RE_OUT_OF_SEQ_ERR acts as a boundary marker for allocating hardware statistics with different num_counters values on chip_gen_p5_p7 devices. As a result, BNXT_RE_NUM_STD_COUNTERS are used when allocating hw_stats, which leads to an out-of-bounds write in bnxt_re_copy_err_stats(). The counters BNXT_RE_REQ_CQE_ERROR, BNXT_RE_RESP_CQE_ERROR, and BNXT_RE_RESP_REMOTE_ACCESS_ERRS are applicable to generic hardware, not only p5/p7 devices. Fix this by moving these counters before BNXT_RE_OUT_OF_SEQ_ERR so they are included in the generic counter set.

In the Linux kernel, the following vulnerability has been resolved: team: fix check for port enabled in team_queue_override_port_prio_changed() There has been a syzkaller bug reported recently with the following trace: list_del corruption, ffff888058bea080->prev is LIST_POISON2 (dead000000000122) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:59! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 3 UID: 0 PID: 21246 Comm: syz.0.2928 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:__list_del_entry_valid_or_report+0x13e/0x200 lib/list_debug.c:59 Code: 48 c7 c7 e0 71 f0 8b e8 30 08 ef fc 90 0f 0b 48 89 ef e8 a5 02 55 fd 48 89 ea 48 89 de 48 c7 c7 40 72 f0 8b e8 13 08 ef fc 90 <0f> 0b 48 89 ef e8 88 02 55 fd 48 89 ea 48 b8 00 00 00 00 00 fc ff RSP: 0018:ffffc9000d49f370 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffff888058bea080 RCX: ffffc9002817d000 RDX: 0000000000000000 RSI: ffffffff819becc6 RDI: 0000000000000005 RBP: dead000000000122 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000001 R12: ffff888039e9c230 R13: ffff888058bea088 R14: ffff888058bea080 R15: ffff888055461480 FS: 00007fbbcfe6f6c0(0000) GS:ffff8880d6d0a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c3afcb0 CR3: 00000000382c7000 CR4: 0000000000352ef0 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:223 [inline] list_del_rcu include/linux/rculist.h:178 [inline] __team_queue_override_port_del drivers/net/team/team_core.c:826 [inline] __team_queue_override_port_del drivers/net/team/team_core.c:821 [inline] team_queue_override_port_prio_changed drivers/net/team/team_core.c:883 [inline] team_priority_option_set+0x171/0x2f0 drivers/net/team/team_core.c:1534 team_option_set drivers/net/team/team_core.c:376 [inline] team_nl_options

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfsd_file reference leak in nfsd4_add_rdaccess_to_wrdeleg() nfsd4_add_rdaccess_to_wrdeleg() unconditionally overwrites fp->fi_fds[O_RDONLY] with a newly acquired nfsd_file. However, if the client already has a SHARE_ACCESS_READ open from a previous OPEN operation, this action overwrites the existing pointer without releasing its reference, orphaning the previous reference. Additionally, the function originally stored the same nfsd_file pointer in both fp->fi_fds[O_RDONLY] and fp->fi_rdeleg_file with only a single reference. When put_deleg_file() runs, it clears fi_rdeleg_file and calls nfs4_file_put_access() to release the file. However, nfs4_file_put_access() only releases fi_fds[O_RDONLY] when the fi_access[O_RDONLY] counter drops to zero. If another READ open exists on the file, the counter remains elevated and the nfsd_file reference from the delegation is never released. This potentially causes open conflicts on that file. Then, on server shutdown, these leaks cause __nfsd_file_cache_purge() to encounter files with an elevated reference count that cannot be cleaned up, ultimately triggering a BUG() in kmem_cache_destroy() because there are still nfsd_file objects allocated in that cache.

In the Linux kernel, the following vulnerability has been resolved: iommu: disable SVA when CONFIG_X86 is set Patch series "Fix stale IOTLB entries for kernel address space", v7. This proposes a fix for a security vulnerability related to IOMMU Shared Virtual Addressing (SVA). In an SVA context, an IOMMU can cache kernel page table entries. When a kernel page table page is freed and reallocated for another purpose, the IOMMU might still hold stale, incorrect entries. This can be exploited to cause a use-after-free or write-after-free condition, potentially leading to privilege escalation or data corruption. This solution introduces a deferred freeing mechanism for kernel page table pages, which provides a safe window to notify the IOMMU to invalidate its caches before the page is reused. This patch (of 8): In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardware shares and walks the CPU's page tables. The x86 architecture maps the kernel's virtual address space into the upper portion of every process's page table. Consequently, in an SVA context, the IOMMU hardware can walk and cache kernel page table entries. The Linux kernel currently lacks a notification mechanism for kernel page table changes, specifically when page table pages are freed and reused. The IOMMU driver is only notified of changes to user virtual address mappings. This can cause the IOMMU's internal caches to retain stale entries for kernel VA. Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise when kernel page table pages are freed and later reallocated. The IOMMU could misinterpret the new data as valid page table entries. The IOMMU might then walk into attacker-controlled memory, leading to arbitrary physical memory DMA access or privilege escalation. This is also a Write-After-Free issue, as the IOMMU will potentially continue to write Accessed and Dirty bits to the freed memory while attempting to walk the stale page tables. Currently, SVA conte

In the Linux kernel, the following vulnerability has been resolved: mptcp: fallback earlier on simult connection Syzkaller reports a simult-connect race leading to inconsistent fallback status: WARNING: CPU: 3 PID: 33 at net/mptcp/subflow.c:1515 subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515 Modules linked in: CPU: 3 UID: 0 PID: 33 Comm: ksoftirqd/3 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515 Code: 89 ee e8 78 61 3c f6 40 84 ed 75 21 e8 8e 66 3c f6 44 89 fe bf 07 00 00 00 e8 c1 61 3c f6 41 83 ff 07 74 09 e8 76 66 3c f6 90 <0f> 0b 90 e8 6d 66 3c f6 48 89 df e8 e5 ad ff ff 31 ff 89 c5 89 c6 RSP: 0018:ffffc900006cf338 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888031acd100 RCX: ffffffff8b7f2abf RDX: ffff88801e6ea440 RSI: ffffffff8b7f2aca RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007 R10: 0000000000000004 R11: 0000000000002c10 R12: ffff88802ba69900 R13: 1ffff920000d9e67 R14: ffff888046f81800 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8880d69bc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560fc0ca1670 CR3: 0000000032c3a000 CR4: 0000000000352ef0 Call Trace: <TASK> tcp_data_queue+0x13b0/0x4f90 net/ipv4/tcp_input.c:5197 tcp_rcv_state_process+0xfdf/0x4ec0 net/ipv4/tcp_input.c:6922 tcp_v6_do_rcv+0x492/0x1740 net/ipv6/tcp_ipv6.c:1672 tcp_v6_rcv+0x2976/0x41e0 net/ipv6/tcp_ipv6.c:1918 ip6_protocol_deliver_rcu+0x188/0x1520 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1e4/0x4b0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] ip6_input+0x105/0x2f0 net/ipv6/ip6_input.c:500 dst_input include/net/dst.h:471 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK in

In the Linux kernel, the following vulnerability has been resolved: iavf: fix off-by-one issues in iavf_config_rss_reg() There are off-by-one bugs when configuring RSS hash key and lookup table, causing out-of-bounds reads to memory [1] and out-of-bounds writes to device registers. Before commit 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS"), the loop upper bounds were: i <= I40E_VFQF_{HKEY,HLUT}_MAX_INDEX which is safe since the value is the last valid index. That commit changed the bounds to: i <= adapter->rss_{key,lut}_size / 4 where `rss_{key,lut}_size / 4` is the number of dwords, so the last valid index is `(rss_{key,lut}_size / 4) - 1`. Therefore, using `<=` accesses one element past the end. Fix the issues by using `<` instead of `<=`, ensuring we do not exceed the bounds. [1] KASAN splat about rss_key_size off-by-one BUG: KASAN: slab-out-of-bounds in iavf_config_rss+0x619/0x800 Read of size 4 at addr ffff888102c50134 by task kworker/u8:6/63 CPU: 0 UID: 0 PID: 63 Comm: kworker/u8:6 Not tainted 6.18.0-rc2-enjuk-tnguy-00378-g3005f5b77652-dirty #156 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: iavf iavf_watchdog_task Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x1a0 iavf_config_rss+0x619/0x800 iavf_watchdog_task+0x2be7/0x3230 process_one_work+0x7fd/0x1420 worker_thread+0x4d1/0xd40 kthread+0x344/0x660 ret_from_fork+0x249/0x320 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 63: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_noprof+0x246/0x6f0 iavf_watchdog_task+0x28fc/0x3230 process_one_work+0x7fd/0x1420 worker_thread+0x4d1/0xd40 kthread+0x344/0x660 ret_from_fork+0x249/0x320 ret_from_fork_asm+0x1a/0x30 The buggy address belongs to the object at ffff888102c50100 which belongs to the cach

In the Linux kernel, the following vulnerability has been resolved: net: rose: fix invalid array index in rose_kill_by_device() rose_kill_by_device() collects sockets into a local array[] and then iterates over them to disconnect sockets bound to a device being brought down. The loop mistakenly indexes array[cnt] instead of array[i]. For cnt < ARRAY_SIZE(array), this reads an uninitialized entry; for cnt == ARRAY_SIZE(array), it is an out-of-bounds read. Either case can lead to an invalid socket pointer dereference and also leaks references taken via sock_hold(). Fix the index to use i.

In the Linux kernel, the following vulnerability has been resolved: ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr() There exists a kernel oops caused by a BUG_ON(nhead < 0) at net/core/skbuff.c:2232 in pskb_expand_head(). This bug is triggered as part of the calipso_skbuff_setattr() routine when skb_cow() is passed headroom > INT_MAX (i.e. (int)(skb_headroom(skb) + len_delta) < 0). The root cause of the bug is due to an implicit integer cast in __skb_cow(). The check (headroom > skb_headroom(skb)) is meant to ensure that delta = headroom - skb_headroom(skb) is never negative, otherwise we will trigger a BUG_ON in pskb_expand_head(). However, if headroom > INT_MAX and delta <= -NET_SKB_PAD, the check passes, delta becomes negative, and pskb_expand_head() is passed a negative value for nhead. Fix the trigger condition in calipso_skbuff_setattr(). Avoid passing "negative" headroom sizes to skb_cow() within calipso_skbuff_setattr() by only using skb_cow() to grow headroom. PoC: Using `netlabelctl` tool: netlabelctl map del default netlabelctl calipso add pass doi:7 netlabelctl map add default address:0::1/128 protocol:calipso,7 Then run the following PoC: int fd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_UDP); // setup msghdr int cmsg_size = 2; int cmsg_len = 0x60; struct msghdr msg; struct sockaddr_in6 dest_addr; struct cmsghdr * cmsg = (struct cmsghdr *) calloc(1, sizeof(struct cmsghdr) + cmsg_len); msg.msg_name = &dest_addr; msg.msg_namelen = sizeof(dest_addr); msg.msg_iov = NULL; msg.msg_iovlen = 0; msg.msg_control = cmsg; msg.msg_controllen = cmsg_len; msg.msg_flags = 0; // setup sockaddr dest_addr.sin6_family = AF_INET6; dest_addr.sin6_port = htons(31337); dest_addr.sin6_flowinfo = htonl(31337); dest_addr.sin6_addr = in6addr_loopba

In the Linux kernel, the following vulnerability has been resolved: RDMA/cm: Fix leaking the multicast GID table reference If the CM ID is destroyed while the CM event for multicast creating is still queued the cancel_work_sync() will prevent the work from running which also prevents destroying the ah_attr. This leaks a refcount and triggers a WARN: GID entry ref leak for dev syz1 index 2 ref=573 WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 release_gid_table drivers/infiniband/core/cache.c:806 [inline] WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 gid_table_release_one+0x284/0x3cc drivers/infiniband/core/cache.c:886 Destroy the ah_attr after canceling the work, it is safe to call this twice.

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Avoid NULL pointer deref for evicted BOs It is possible for a BO to exist that is not currently associated with a resource, e.g. because it has been evicted. When devcoredump tries to read the contents of all BOs for dumping, we need to expect this as well -- in this case, ENODATA is recorded instead of the buffer contents.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: revert use of devm_kzalloc in btusb This reverts commit 98921dbd00c4e ("Bluetooth: Use devm_kzalloc in btusb.c file"). In btusb_probe(), we use devm_kzalloc() to allocate the btusb data. This ties the lifetime of all the btusb data to the binding of a driver to one interface, INTF. In a driver that binds to other interfaces, ISOC and DIAG, this is an accident waiting to happen. The issue is revealed in btusb_disconnect(), where calling usb_driver_release_interface(&btusb_driver, data->intf) will have devm free the data that is also being used by the other interfaces of the driver that may not be released yet. To fix this, revert the use of devm and go back to freeing memory explicitly.

In the Linux kernel, the following vulnerability has been resolved: ASoC: stm32: sai: fix OF node leak on probe The reference taken to the sync provider OF node when probing the platform device is currently only dropped if the set_sync() callback fails during DAI probe. Make sure to drop the reference on platform probe failures (e.g. probe deferral) and on driver unbind. This also avoids a potential use-after-free in case the DAI is ever reprobed without first rebinding the platform driver.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix a BUG in rt6_get_pcpu_route() under PREEMPT_RT On PREEMPT_RT kernels, after rt6_get_pcpu_route() returns NULL, the current task can be preempted. Another task running on the same CPU may then execute rt6_make_pcpu_route() and successfully install a pcpu_rt entry. When the first task resumes execution, its cmpxchg() in rt6_make_pcpu_route() will fail because rt6i_pcpu is no longer NULL, triggering the BUG_ON(prev). It's easy to reproduce it by adding mdelay() after rt6_get_pcpu_route(). Using preempt_disable/enable is not appropriate here because ip6_rt_pcpu_alloc() may sleep. Fix this by handling the cmpxchg() failure gracefully on PREEMPT_RT: free our allocation and return the existing pcpu_rt installed by another task. The BUG_ON is replaced by WARN_ON_ONCE for non-PREEMPT_RT kernels where such races should not occur.

In the Linux kernel, the following vulnerability has been resolved: net: nfc: fix deadlock between nfc_unregister_device and rfkill_fop_write A deadlock can occur between nfc_unregister_device() and rfkill_fop_write() due to lock ordering inversion between device_lock and rfkill_global_mutex. The problematic lock order is: Thread A (rfkill_fop_write): rfkill_fop_write() mutex_lock(&rfkill_global_mutex) rfkill_set_block() nfc_rfkill_set_block() nfc_dev_down() device_lock(&dev->dev) <- waits for device_lock Thread B (nfc_unregister_device): nfc_unregister_device() device_lock(&dev->dev) rfkill_unregister() mutex_lock(&rfkill_global_mutex) <- waits for rfkill_global_mutex This creates a classic ABBA deadlock scenario. Fix this by moving rfkill_unregister() and rfkill_destroy() outside the device_lock critical section. Store the rfkill pointer in a local variable before releasing the lock, then call rfkill_unregister() after releasing device_lock. This change is safe because rfkill_fop_write() holds rfkill_global_mutex while calling the rfkill callbacks, and rfkill_unregister() also acquires rfkill_global_mutex before cleanup. Therefore, rfkill_unregister() will wait for any ongoing callback to complete before proceeding, and device_del() is only called after rfkill_unregister() returns, preventing any use-after-free. The similar lock ordering in nfc_register_device() (device_lock -> rfkill_global_mutex via rfkill_register) is safe because during registration the device is not yet in rfkill_list, so no concurrent rfkill operations can occur on this device.

In the Linux kernel, the following vulnerability has been resolved: powerpc/64s/slb: Fix SLB multihit issue during SLB preload On systems using the hash MMU, there is a software SLB preload cache that mirrors the entries loaded into the hardware SLB buffer. This preload cache is subject to periodic eviction — typically after every 256 context switches — to remove old entry. To optimize performance, the kernel skips switch_mmu_context() in switch_mm_irqs_off() when the prev and next mm_struct are the same. However, on hash MMU systems, this can lead to inconsistencies between the hardware SLB and the software preload cache. If an SLB entry for a process is evicted from the software cache on one CPU, and the same process later runs on another CPU without executing switch_mmu_context(), the hardware SLB may retain stale entries. If the kernel then attempts to reload that entry, it can trigger an SLB multi-hit error. The following timeline shows how stale SLB entries are created and can cause a multi-hit error when a process moves between CPUs without a MMU context switch. CPU 0 CPU 1 ----- ----- Process P exec swapper/1 load_elf_binary begin_new_exc activate_mm switch_mm_irqs_off switch_mmu_context switch_slb /* * This invalidates all * the entries in the HW * and setup the new HW * SLB entries as per the * preload cache. */ context_switch sched_migrate_task migrates process P to cpu-1 Process swapper/0 context switch (to process P) (uses mm_struct of Process P) switch_mm_irqs_off() switch_slb load_slb++ /* * load_slb becomes 0 here * and

In the Linux kernel, the following vulnerability has been resolved: tpm: Cap the number of PCR banks tpm2_get_pcr_allocation() does not cap any upper limit for the number of banks. Cap the limit to eight banks so that out of bounds values coming from external I/O cause on only limited harm.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Limit num_syncs to prevent oversized allocations The OA open parameters did not validate num_syncs, allowing userspace to pass arbitrarily large values, potentially leading to excessive allocations. Add check to ensure that num_syncs does not exceed DRM_XE_MAX_SYNCS, returning -EINVAL when the limit is violated. v2: use XE_IOCTL_DBG() and drop duplicated check. (Ashutosh) (cherry picked from commit e057b2d2b8d815df3858a87dffafa2af37e5945b)

In the Linux kernel, the following vulnerability has been resolved: scsi: aic94xx: fix use-after-free in device removal path The asd_pci_remove() function fails to synchronize with pending tasklets before freeing the asd_ha structure, leading to a potential use-after-free vulnerability. When a device removal is triggered (via hot-unplug or module unload), race condition can occur. The fix adds tasklet_kill() before freeing the asd_ha structure, ensuring all scheduled tasklets complete before cleanup proceeds.

In the Linux kernel, the following vulnerability has been resolved: functionfs: fix the open/removal races ffs_epfile_open() can race with removal, ending up with file->private_data pointing to freed object. There is a total count of opened files on functionfs (both ep0 and dynamic ones) and when it hits zero, dynamic files get removed. Unfortunately, that removal can happen while another thread is in ffs_epfile_open(), but has not incremented the count yet. In that case open will succeed, leaving us with UAF on any subsequent read() or write(). The root cause is that ffs->opened is misused; atomic_dec_and_test() vs. atomic_add_return() is not a good idea, when object remains visible all along. To untangle that * serialize openers on ffs->mutex (both for ep0 and for dynamic files) * have dynamic ones use atomic_inc_not_zero() and fail if we had zero ->opened; in that case the file we are opening is doomed. * have the inodes of dynamic files marked on removal (from the callback of simple_recursive_removal()) - clear ->i_private there. * have open of dynamic ones verify they hadn't been already removed, along with checking that state is FFS_ACTIVE.

In the Linux kernel, the following vulnerability has been resolved: Input: lkkbd - disable pending work before freeing device lkkbd_interrupt() schedules lk->tq via schedule_work(), and the work handler lkkbd_reinit() dereferences the lkkbd structure and its serio/input_dev fields. lkkbd_disconnect() and error paths in lkkbd_connect() free the lkkbd structure without preventing the reinit work from being queued again until serio_close() returns. This can allow the work handler to run after the structure has been freed, leading to a potential use-after-free. Use disable_work_sync() instead of cancel_work_sync() to ensure the reinit work cannot be re-queued, and call it both in lkkbd_disconnect() and in lkkbd_connect() error paths after serio_open().

In the Linux kernel, the following vulnerability has been resolved: shmem: fix recovery on rename failures maple_tree insertions can fail if we are seriously short on memory; simple_offset_rename() does not recover well if it runs into that. The same goes for simple_offset_rename_exchange(). Moreover, shmem_whiteout() expects that if it succeeds, the caller will progress to d_move(), i.e. that shmem_rename2() won't fail past the successful call of shmem_whiteout(). Not hard to fix, fortunately - mtree_store() can't fail if the index we are trying to store into is already present in the tree as a singleton. For simple_offset_rename_exchange() that's enough - we just need to be careful about the order of operations. For simple_offset_rename() solution is to preinsert the target into the tree for new_dir; the rest can be done without any potentially failing operations. That preinsertion has to be done in shmem_rename2() rather than in simple_offset_rename() itself - otherwise we'd need to deal with the possibility of failure after successful shmem_whiteout().

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: fix use-after-free on probe deferral The driver is dropping the references taken to the larb devices during probe after successful lookup as well as on errors. This can potentially lead to a use-after-free in case a larb device has not yet been bound to its driver so that the iommu driver probe defers. Fix this by keeping the references as expected while the iommu driver is bound.

In the Linux kernel, the following vulnerability has been resolved: ublk: clean up user copy references on ublk server exit If a ublk server process releases a ublk char device file, any requests dispatched to the ublk server but not yet completed will retain a ref value of UBLK_REFCOUNT_INIT. Before commit e63d2228ef83 ("ublk: simplify aborting ublk request"), __ublk_fail_req() would decrement the reference count before completing the failed request. However, that commit optimized __ublk_fail_req() to call __ublk_complete_rq() directly without decrementing the request reference count. The leaked reference count incorrectly allows user copy and zero copy operations on the completed ublk request. It also triggers the WARN_ON_ONCE(refcount_read(&io->ref)) warnings in ublk_queue_reinit() and ublk_deinit_queue(). Commit c5c5eb24ed61 ("ublk: avoid ublk_io_release() called after ublk char dev is closed") already fixed the issue for ublk devices using UBLK_F_SUPPORT_ZERO_COPY or UBLK_F_AUTO_BUF_REG. However, the reference count leak also affects UBLK_F_USER_COPY, the other reference-counted data copy mode. Fix the condition in ublk_check_and_reset_active_ref() to include all reference-counted data copy modes. This ensures that any ublk requests still owned by the ublk server when it exits have their reference counts reset to 0.

In the Linux kernel, the following vulnerability has been resolved: f2fs: invalidate dentry cache on failed whiteout creation F2FS can mount filesystems with corrupted directory depth values that get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT operations are performed on such directories, f2fs_rename performs directory modifications (updating target entry and deleting source entry) before attempting to add the whiteout entry via f2fs_add_link. If f2fs_add_link fails due to the corrupted directory structure, the function returns an error to VFS, but the partial directory modifications have already been committed to disk. VFS assumes the entire rename operation failed and does not update the dentry cache, leaving stale mappings. In the error path, VFS does not call d_move() to update the dentry cache. This results in new_dentry still pointing to the old inode (new_inode) which has already had its i_nlink decremented to zero. The stale cache causes subsequent operations to incorrectly reference the freed inode. This causes subsequent operations to use cached dentry information that no longer matches the on-disk state. When a second rename targets the same entry, VFS attempts to decrement i_nlink on the stale inode, which may already have i_nlink=0, triggering a WARNING in drop_nlink(). Example sequence: 1. First rename (RENAME_WHITEOUT): file2 → file1 - f2fs updates file1 entry on disk (points to inode 8) - f2fs deletes file2 entry on disk - f2fs_add_link(whiteout) fails (corrupted directory) - Returns error to VFS - VFS does not call d_move() due to error - VFS cache still has: file1 → inode 7 (stale!) - inode 7 has i_nlink=0 (already decremented) 2. Second rename: file3 → file1 - VFS uses stale cache: file1 → inode 7 - Tries to drop_nlink on inode 7 (i_nlink already 0) - WARNING in drop_nlink() Fix this by explicitly invalidating old_dentry and new_dentry when f2fs_add_link fails during whiteout creation. This for

In the Linux kernel, the following vulnerability has been resolved: svcrdma: bound check rq_pages index in inline path svc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] without verifying rc_curpage stays within the allocated page array. Add guards before the first use and after advancing to a new page.

In the Linux kernel, the following vulnerability has been resolved: ntfs: set dummy blocksize to read boot_block when mounting When mounting, sb->s_blocksize is used to read the boot_block without being defined or validated. Set a dummy blocksize before attempting to read the boot_block. The issue can be triggered with the following syz reproducer: mkdirat(0xffffffffffffff9c, &(0x7f0000000080)='./file1\x00', 0x0) r4 = openat$nullb(0xffffffffffffff9c, &(0x7f0000000040), 0x121403, 0x0) ioctl$FS_IOC_SETFLAGS(r4, 0x40081271, &(0x7f0000000980)=0x4000) mount(&(0x7f0000000140)=@nullb, &(0x7f0000000040)='./cgroup\x00', &(0x7f0000000000)='ntfs3\x00', 0x2208004, 0x0) syz_clone(0x88200200, 0x0, 0x0, 0x0, 0x0, 0x0) Here, the ioctl sets the bdev block size to 16384. During mount, get_tree_bdev_flags() calls sb_set_blocksize(sb, block_size(bdev)), but since block_size(bdev) > PAGE_SIZE, sb_set_blocksize() leaves sb->s_blocksize at zero. Later, ntfs_init_from_boot() attempts to read the boot_block while sb->s_blocksize is still zero, which triggers the bug. [almaz.alexandrovich@paragon-software.com: changed comment style, added return value handling]

In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: Always remove class from active list before deleting in ets_qdisc_change zdi-disclosures@trendmicro.com says: The vulnerability is a race condition between `ets_qdisc_dequeue` and `ets_qdisc_change`. It leads to UAF on `struct Qdisc` object. Attacker requires the capability to create new user and network namespace in order to trigger the bug. See my additional commentary at the end of the analysis. Analysis: static int ets_qdisc_change(struct Qdisc *sch, struct nlattr *opt, struct netlink_ext_ack *extack) { ... // (1) this lock is preventing .change handler (`ets_qdisc_change`) //to race with .dequeue handler (`ets_qdisc_dequeue`) sch_tree_lock(sch); for (i = nbands; i < oldbands; i++) { if (i >= q->nstrict && q->classes[i].qdisc->q.qlen) list_del_init(&q->classes[i].alist); qdisc_purge_queue(q->classes[i].qdisc); } WRITE_ONCE(q->nbands, nbands); for (i = nstrict; i < q->nstrict; i++) { if (q->classes[i].qdisc->q.qlen) { // (2) the class is added to the q->active list_add_tail(&q->classes[i].alist, &q->active); q->classes[i].deficit = quanta[i]; } } WRITE_ONCE(q->nstrict, nstrict); memcpy(q->prio2band, priomap, sizeof(priomap)); for (i = 0; i < q->nbands; i++) WRITE_ONCE(q->classes[i].quantum, quanta[i]); for (i = oldbands; i < q->nbands; i++) { q->classes[i].qdisc = queues[i]; if (q->classes[i].qdisc != &noop_qdisc) qdisc_hash_add(q->classes[i].qdisc, true); } // (3) the qdisc is unlocked, now dequeue can be called in parallel // to the rest of .change handler sch_tree_unlock(sch); ets_offload_change(sch); for (i = q->nbands; i < oldbands; i++) {

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential deadlock As Jiaming Zhang and syzbot reported, there is potential deadlock in f2fs as below: Chain exists of: &sbi->cp_rwsem --> fs_reclaim --> sb_internal#2 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- rlock(sb_internal#2); lock(fs_reclaim); lock(sb_internal#2); rlock(&sbi->cp_rwsem); *** DEADLOCK *** 3 locks held by kswapd0/73: #0: ffffffff8e247a40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:7015 [inline] #0: ffffffff8e247a40 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0x951/0x2800 mm/vmscan.c:7389 #1: ffff8880118400e0 (&type->s_umount_key#50){.+.+}-{4:4}, at: super_trylock_shared fs/super.c:562 [inline] #1: ffff8880118400e0 (&type->s_umount_key#50){.+.+}-{4:4}, at: super_cache_scan+0x91/0x4b0 fs/super.c:197 #2: ffff888011840610 (sb_internal#2){.+.+}-{0:0}, at: f2fs_evict_inode+0x8d9/0x1b60 fs/f2fs/inode.c:890 stack backtrace: CPU: 0 UID: 0 PID: 73 Comm: kswapd0 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_circular_bug+0x2ee/0x310 kernel/locking/lockdep.c:2043 check_noncircular+0x134/0x160 kernel/locking/lockdep.c:2175 check_prev_add kernel/locking/lockdep.c:3165 [inline] check_prevs_add kernel/locking/lockdep.c:3284 [inline] validate_chain+0xb9b/0x2140 kernel/locking/lockdep.c:3908 __lock_acquire+0xab9/0xd20 kernel/locking/lockdep.c:5237 lock_acquire+0x120/0x360 kernel/locking/lockdep.c:5868 down_read+0x46/0x2e0 kernel/locking/rwsem.c:1537 f2fs_down_read fs/f2fs/f2fs.h:2278 [inline] f2fs_lock_op fs/f2fs/f2fs.h:2357 [inline] f2fs_do_truncate_blocks+0x21c/0x10c0 fs/f2fs/file.c:791 f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:867 f2fs_truncate+

In the Linux kernel, the following vulnerability has been resolved: net: hns3: using the num_tqps in the vf driver to apply for resources Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller than hdev->num_tqps, which causes some hdev->htqp[i] to remain uninitialized in hclgevf_knic_setup(). Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps, ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent and that all elements are properly initialized.

In the Linux kernel, the following vulnerability has been resolved: ublk: fix deadlock when reading partition table When one process(such as udev) opens ublk block device (e.g., to read the partition table via bdev_open()), a deadlock[1] can occur: 1. bdev_open() grabs disk->open_mutex 2. The process issues read I/O to ublk backend to read partition table 3. In __ublk_complete_rq(), blk_update_request() or blk_mq_end_request() runs bio->bi_end_io() callbacks 4. If this triggers fput() on file descriptor of ublk block device, the work may be deferred to current task's task work (see fput() implementation) 5. This eventually calls blkdev_release() from the same context 6. blkdev_release() tries to grab disk->open_mutex again 7. Deadlock: same task waiting for a mutex it already holds The fix is to run blk_update_request() and blk_mq_end_request() with bottom halves disabled. This forces blkdev_release() to run in kernel work-queue context instead of current task work context, and allows ublk server to make forward progress, and avoids the deadlock. [axboe: rewrite comment in ublk]

In the Linux kernel, the following vulnerability has been resolved: Input: alps - fix use-after-free bugs caused by dev3_register_work The dev3_register_work delayed work item is initialized within alps_reconnect() and scheduled upon receipt of the first bare PS/2 packet from an external PS/2 device connected to the ALPS touchpad. During device detachment, the original implementation calls flush_workqueue() in psmouse_disconnect() to ensure completion of dev3_register_work. However, the flush_workqueue() in psmouse_disconnect() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work items submitted after flush_workqueue() is called are not included in the set of tasks that the flush operation awaits. This means that after flush_workqueue() has finished executing, the dev3_register_work could still be scheduled. Although the psmouse state is set to PSMOUSE_CMD_MODE in psmouse_disconnect(), the scheduling of dev3_register_work remains unaffected. The race condition can occur as follows: CPU 0 (cleanup path) | CPU 1 (delayed work) psmouse_disconnect() | psmouse_set_state() | flush_workqueue() | alps_report_bare_ps2_packet() alps_disconnect() | psmouse_queue_work() kfree(priv); // FREE | alps_register_bare_ps2_mouse() | priv = container_of(work...); // USE | priv->dev3 // USE Add disable_delayed_work_sync() in alps_disconnect() to ensure that dev3_register_work is properly canceled and prevented from executing after the alps_data structure has been deallocated. This bug is identified by static analysis.

In the Linux kernel, the following vulnerability has been resolved: fuse: fix readahead reclaim deadlock Commit e26ee4efbc79 ("fuse: allocate ff->release_args only if release is needed") skips allocating ff->release_args if the server does not implement open. However in doing so, fuse_prepare_release() now skips grabbing the reference on the inode, which makes it possible for an inode to be evicted from the dcache while there are inflight readahead requests. This causes a deadlock if the server triggers reclaim while servicing the readahead request and reclaim attempts to evict the inode of the file being read ahead. Since the folio is locked during readahead, when reclaim evicts the fuse inode and fuse_evict_inode() attempts to remove all folios associated with the inode from the page cache (truncate_inode_pages_range()), reclaim will block forever waiting for the lock since readahead cannot relinquish the lock because it is itself blocked in reclaim: >>> stack_trace(1504735) folio_wait_bit_common (mm/filemap.c:1308:4) folio_lock (./include/linux/pagemap.h:1052:3) truncate_inode_pages_range (mm/truncate.c:336:10) fuse_evict_inode (fs/fuse/inode.c:161:2) evict (fs/inode.c:704:3) dentry_unlink_inode (fs/dcache.c:412:3) __dentry_kill (fs/dcache.c:615:3) shrink_kill (fs/dcache.c:1060:12) shrink_dentry_list (fs/dcache.c:1087:3) prune_dcache_sb (fs/dcache.c:1168:2) super_cache_scan (fs/super.c:221:10) do_shrink_slab (mm/shrinker.c:435:9) shrink_slab (mm/shrinker.c:626:10) shrink_node (mm/vmscan.c:5951:2) shrink_zones (mm/vmscan.c:6195:3) do_try_to_free_pages (mm/vmscan.c:6257:3) do_swap_page (mm/memory.c:4136:11) handle_pte_fault (mm/memory.c:5562:10) handle_mm_fault (mm/memory.c:5870:9) do_user_addr_fault (arch/x86/mm/fault.c:1338:10) handle_page_fault (arch/x86/mm/fault.c:1481:3) exc_page_fault (arch/x86/mm/fault.c:1539:2) asm_exc_page_fault+0x22/0x27 Fix this deadlock by allocating ff->release_args and grabbing the reference on the inode whe

In the Linux kernel, the following vulnerability has been resolved: ext4: xattr: fix null pointer deref in ext4_raw_inode() If ext4_get_inode_loc() fails (e.g. if it returns -EFSCORRUPTED), iloc.bh will remain set to NULL. Since ext4_xattr_inode_dec_ref_all() lacks error checking, this will lead to a null pointer dereference in ext4_raw_inode(), called right after ext4_get_inode_loc(). Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb: dtv5100: fix out-of-bounds in dtv5100_i2c_msg() rlen value is a user-controlled value, but dtv5100_i2c_msg() does not check the size of the rlen value. Therefore, if it is set to a value larger than sizeof(st->data), an out-of-bounds vuln occurs for st->data. Therefore, we need to add proper range checking to prevent this vuln.

In the Linux kernel, the following vulnerability has been resolved: scsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path" This reverts commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9. The commit being reverted added code to __qla2x00_abort_all_cmds() to call sp->done() without holding a spinlock. But unlike the older code below it, this new code failed to check sp->cmd_type and just assumed TYPE_SRB, which results in a jump to an invalid pointer in target-mode with TYPE_TGT_CMD: qla2xxx [0000:65:00.0]-d034:8: qla24xx_do_nack_work create sess success 0000000009f7a79b qla2xxx [0000:65:00.0]-5003:8: ISP System Error - mbx1=1ff5h mbx2=10h mbx3=0h mbx4=0h mbx5=191h mbx6=0h mbx7=0h. qla2xxx [0000:65:00.0]-d01e:8: -> fwdump no buffer qla2xxx [0000:65:00.0]-f03a:8: qla_target(0): System error async event 0x8002 occurred qla2xxx [0000:65:00.0]-00af:8: Performing ISP error recovery - ha=0000000058183fda. BUG: kernel NULL pointer dereference, address: 0000000000000000 PF: supervisor instruction fetch in kernel mode PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9446 Comm: qla2xxx_8_dpc Tainted: G O 6.1.133 #1 Hardware name: Supermicro Super Server/X11SPL-F, BIOS 4.2 12/15/2023 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc90001f93dc8 EFLAGS: 00010206 RAX: 0000000000000282 RBX: 0000000000000355 RCX: ffff88810d16a000 RDX: ffff88810dbadaa8 RSI: 0000000000080000 RDI: ffff888169dc38c0 RBP: ffff888169dc38c0 R08: 0000000000000001 R09: 0000000000000045 R10: ffffffffa034bdf0 R11: 0000000000000000 R12: ffff88810800bb40 R13: 0000000000001aa8 R14: ffff888100136610 R15: ffff8881070f7400 FS: 0000000000000000(0000) GS:ffff88bf80080000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 000000010c8ff006 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in ksmbd_tree_connect_put under concurrency Under high concurrency, A tree-connection object (tcon) is freed on a disconnect path while another path still holds a reference and later executes *_put()/write on it.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fw_tracer, Validate format string parameters Add validation for format string parameters in the firmware tracer to prevent potential security vulnerabilities and crashes from malformed format strings received from firmware. The firmware tracer receives format strings from the device firmware and uses them to format trace messages. Without proper validation, bad firmware could provide format strings with invalid format specifiers (e.g., %s, %p, %n) that could lead to crashes, or other undefined behavior. Add mlx5_tracer_validate_params() to validate that all format specifiers in trace strings are limited to safe integer/hex formats (%x, %d, %i, %u, %llx, %lx, etc.). Reject strings containing other format types that could be used to access arbitrary memory or cause crashes. Invalid format strings are added to the trace output for visibility with "BAD_FORMAT: " prefix.

In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: Remove drr class from the active list if it changes to strict Whenever a user issues an ets qdisc change command, transforming a drr class into a strict one, the ets code isn't checking whether that class was in the active list and removing it. This means that, if a user changes a strict class (which was in the active list) back to a drr one, that class will be added twice to the active list [1]. Doing so with the following commands: tc qdisc add dev lo root handle 1: ets bands 2 strict 1 tc qdisc add dev lo parent 1:2 handle 20: \ tbf rate 8bit burst 100b latency 1s tc filter add dev lo parent 1: basic classid 1:2 ping -c1 -W0.01 -s 56 127.0.0.1 tc qdisc change dev lo root handle 1: ets bands 2 strict 2 tc qdisc change dev lo root handle 1: ets bands 2 strict 1 ping -c1 -W0.01 -s 56 127.0.0.1 Will trigger the following splat with list debug turned on: [ 59.279014][ T365] ------------[ cut here ]------------ [ 59.279452][ T365] list_add double add: new=ffff88801d60e350, prev=ffff88801d60e350, next=ffff88801d60e2c0. [ 59.280153][ T365] WARNING: CPU: 3 PID: 365 at lib/list_debug.c:35 __list_add_valid_or_report+0x17f/0x220 [ 59.280860][ T365] Modules linked in: [ 59.281165][ T365] CPU: 3 UID: 0 PID: 365 Comm: tc Not tainted 6.18.0-rc7-00105-g7e9f13163c13-dirty #239 PREEMPT(voluntary) [ 59.281977][ T365] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 59.282391][ T365] RIP: 0010:__list_add_valid_or_report+0x17f/0x220 [ 59.282842][ T365] Code: 89 c6 e8 d4 b7 0d ff 90 0f 0b 90 90 31 c0 e9 31 ff ff ff 90 48 c7 c7 e0 a0 22 9f 48 89 f2 48 89 c1 4c 89 c6 e8 b2 b7 0d ff 90 <0f> 0b 90 90 31 c0 e9 0f ff ff ff 48 89 f7 48 89 44 24 10 4c 89 44 ... [ 59.288812][ T365] Call Trace: [ 59.289056][ T365] <TASK> [ 59.289224][ T365] ? srso_alias_return_thunk+0x5/0xfbef5 [ 59.289546][ T365] ets_qdisc_change+0xd2b/0x1e80 [ 59.289891][ T365] ? __lock_ac

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix filename leak in __io_openat_prep() __io_openat_prep() allocates a struct filename using getname(). However, for the condition of the file being installed in the fixed file table as well as having O_CLOEXEC flag set, the function returns early. At that point, the request doesn't have REQ_F_NEED_CLEANUP flag set. Due to this, the memory for the newly allocated struct filename is not cleaned up, causing a memory leak. Fix this by setting the REQ_F_NEED_CLEANUP for the request just after the successful getname() call, so that when the request is torn down, the filename will be cleaned up, along with other resources needing cleanup.

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix ipv4 null-ptr-deref in route error path The IPv4 code path in __ip_vs_get_out_rt() calls dst_link_failure() without ensuring skb->dev is set, leading to a NULL pointer dereference in fib_compute_spec_dst() when ipv4_link_failure() attempts to send ICMP destination unreachable messages. The issue emerged after commit ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") started calling __ip_options_compile() from ipv4_link_failure(). This code path eventually calls fib_compute_spec_dst() which dereferences skb->dev. An attempt was made to fix the NULL skb->dev dereference in commit 0113d9c9d1cc ("ipv4: fix null-deref in ipv4_link_failure"), but it only addressed the immediate dev_net(skb->dev) dereference by using a fallback device. The fix was incomplete because fib_compute_spec_dst() later in the call chain still accesses skb->dev directly, which remains NULL when IPVS calls dst_link_failure(). The crash occurs when: 1. IPVS processes a packet in NAT mode with a misconfigured destination 2. Route lookup fails in __ip_vs_get_out_rt() before establishing a route 3. The error path calls dst_link_failure(skb) with skb->dev == NULL 4. ipv4_link_failure() → ipv4_send_dest_unreach() → __ip_options_compile() → fib_compute_spec_dst() 5. fib_compute_spec_dst() dereferences NULL skb->dev Apply the same fix used for IPv6 in commit 326bf17ea5d4 ("ipvs: fix ipv6 route unreach panic"): set skb->dev from skb_dst(skb)->dev before calling dst_link_failure(). KASAN: null-ptr-deref in range [0x0000000000000328-0x000000000000032f] CPU: 1 PID: 12732 Comm: syz.1.3469 Not tainted 6.6.114 #2 RIP: 0010:__in_dev_get_rcu include/linux/inetdevice.h:233 RIP: 0010:fib_compute_spec_dst+0x17a/0x9f0 net/ipv4/fib_frontend.c:285 Call Trace: <TASK> spec_dst_fill net/ipv4/ip_options.c:232 spec_dst_fill net/ipv4/ip_options.c:229 __ip_options_compile+0x13a1/0x17d0 net/ipv4/ip_options.c:330 ipv4_sen

In the Linux kernel, the following vulnerability has been resolved: svcrdma: use rc_pageoff for memcpy byte offset svc_rdma_copy_inline_range added rc_curpage (page index) to the page base instead of the byte offset rc_pageoff. Use rc_pageoff so copies land within the current page. Found by ZeroPath (https://zeropath.com)

In the Linux kernel, the following vulnerability has been resolved: KVM: Disallow toggling KVM_MEM_GUEST_MEMFD on an existing memslot Reject attempts to disable KVM_MEM_GUEST_MEMFD on a memslot that was initially created with a guest_memfd binding, as KVM doesn't support toggling KVM_MEM_GUEST_MEMFD on existing memslots. KVM prevents enabling KVM_MEM_GUEST_MEMFD, but doesn't prevent clearing the flag. Failure to reject the new memslot results in a use-after-free due to KVM not unbinding from the guest_memfd instance. Unbinding on a FLAGS_ONLY change is easy enough, and can/will be done as a hardening measure (in anticipation of KVM supporting dirty logging on guest_memfd at some point), but fixing the use-after-free would only address the immediate symptom. ================================================================== BUG: KASAN: slab-use-after-free in kvm_gmem_release+0x362/0x400 [kvm] Write of size 8 at addr ffff8881111ae908 by task repro/745 CPU: 7 UID: 1000 PID: 745 Comm: repro Not tainted 6.18.0-rc6-115d5de2eef3-next-kasan #3 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x51/0x60 print_report+0xcb/0x5c0 kasan_report+0xb4/0xe0 kvm_gmem_release+0x362/0x400 [kvm] __fput+0x2fa/0x9d0 task_work_run+0x12c/0x200 do_exit+0x6ae/0x2100 do_group_exit+0xa8/0x230 __x64_sys_exit_group+0x3a/0x50 x64_sys_call+0x737/0x740 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f581f2eac31 </TASK> Allocated by task 745 on cpu 6 at 9.746971s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50 __kasan_kmalloc+0x77/0x90 kvm_set_memory_region.part.0+0x652/0x1110 [kvm] kvm_vm_ioctl+0x14b0/0x3290 [kvm] __x64_sys_ioctl+0x129/0x1a0 do_syscall_64+0x5b/0x900 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 745 on cpu 6 at 9.747467s: kasan_save_stack+0x20/0x40 kasan_save_track+0x13/0x50

In the Linux kernel, the following vulnerability has been resolved: ksmbd: vfs: fix race on m_flags in vfs_cache ksmbd maintains delete-on-close and pending-delete state in ksmbd_inode->m_flags. In vfs_cache.c this field is accessed under inconsistent locking: some paths read and modify m_flags under ci->m_lock while others do so without taking the lock at all. Examples: - ksmbd_query_inode_status() and __ksmbd_inode_close() use ci->m_lock when checking or updating m_flags. - ksmbd_inode_pending_delete(), ksmbd_set_inode_pending_delete(), ksmbd_clear_inode_pending_delete() and ksmbd_fd_set_delete_on_close() used to read and modify m_flags without ci->m_lock. This creates a potential data race on m_flags when multiple threads open, close and delete the same file concurrently. In the worst case delete-on-close and pending-delete bits can be lost or observed in an inconsistent state, leading to confusing delete semantics (files that stay on disk after delete-on-close, or files that disappear while still in use). Fix it by: - Making ksmbd_query_inode_status() look at m_flags under ci->m_lock after dropping inode_hash_lock. - Adding ci->m_lock protection to all helpers that read or modify m_flags (ksmbd_inode_pending_delete(), ksmbd_set_inode_pending_delete(), ksmbd_clear_inode_pending_delete(), ksmbd_fd_set_delete_on_close()). - Keeping the existing ci->m_lock protection in __ksmbd_inode_close(), and moving the actual unlink/xattr removal outside the lock. This unifies the locking around m_flags and removes the data race while preserving the existing delete-on-close behaviour.

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: initialize local pointers upon transfer of memory ownership vidtv_channel_si_init() creates a temporary list (program, service, event) and ownership of the memory itself is transferred to the PAT/SDT/EIT tables through vidtv_psi_pat_program_assign(), vidtv_psi_sdt_service_assign(), vidtv_psi_eit_event_assign(). The problem here is that the local pointer where the memory ownership transfer was completed is not initialized to NULL. This causes the vidtv_psi_pmt_create_sec_for_each_pat_entry() function to fail, and in the flow that jumps to free_eit, the memory that was freed by vidtv_psi_*_table_destroy() can be accessed again by vidtv_psi_*_event_destroy() due to the uninitialized local pointer, so it is freed once again. Therefore, to prevent use-after-free and double-free vulnerability, local pointers must be initialized to NULL when transferring memory ownership.