CVEs

In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: signal: Fix restoration of SVE context When SME is supported, Restoring SVE signal context can go wrong in a few ways, including placing the task into an invalid state where the kernel may read from out-of-bounds memory (and may potentially take a fatal fault) and/or may kill the task with a SIGKILL. (1) Restoring a context with SVE_SIG_FLAG_SM set can place the task into an invalid state where SVCR.SM is set (and sve_state is non-NULL) but TIF_SME is clear, consequently resuting in out-of-bounds memory reads and/or killing the task with SIGKILL. This can only occur in unusual (but legitimate) cases where the SVE signal context has either been modified by userspace or was saved in the context of another task (e.g. as with CRIU), as otherwise the presence of an SVE signal context with SVE_SIG_FLAG_SM implies that TIF_SME is already set. While in this state, task_fpsimd_load() will NOT configure SMCR_ELx (leaving some arbitrary value configured in hardware) before restoring SVCR and attempting to restore the streaming mode SVE registers from memory via sve_load_state(). As the value of SMCR_ELx.LEN may be larger than the task's streaming SVE vector length, this may read memory outside of the task's allocated sve_state, reading unrelated data and/or triggering a fault. While this can result in secrets being loaded into streaming SVE registers, these values are never exposed. As TIF_SME is clear, fpsimd_bind_task_to_cpu() will configure CPACR_ELx.SMEN to trap EL0 accesses to streaming mode SVE registers, so these cannot be accessed directly at EL0. As fpsimd_save_user_state() verifies the live vector length before saving (S)SVE state to memory, no secret values can be saved back to memory (and hence cannot be observed via ptrace, signals, etc). When the live vector length doesn't match th

In the Linux kernel, the following vulnerability has been resolved: leds: led-class: Only Add LED to leds_list when it is fully ready Before this change the LED was added to leds_list before led_init_core() gets called adding it the list before led_classdev.set_brightness_work gets initialized. This leaves a window where led_trigger_register() of a LED's default trigger will call led_trigger_set() which calls led_set_brightness() which in turn will end up queueing the *uninitialized* led_classdev.set_brightness_work. This race gets hit by the lenovo-thinkpad-t14s EC driver which registers 2 LEDs with a default trigger provided by snd_ctl_led.ko in quick succession. The first led_classdev_register() causes an async modprobe of snd_ctl_led to run and that async modprobe manages to exactly hit the window where the second LED is on the leds_list without led_init_core() being called for it, resulting in: ------------[ cut here ]------------ WARNING: CPU: 11 PID: 5608 at kernel/workqueue.c:4234 __flush_work+0x344/0x390 Hardware name: LENOVO 21N2S01F0B/21N2S01F0B, BIOS N42ET93W (2.23 ) 09/01/2025 ... Call trace: __flush_work+0x344/0x390 (P) flush_work+0x2c/0x50 led_trigger_set+0x1c8/0x340 led_trigger_register+0x17c/0x1c0 led_trigger_register_simple+0x84/0xe8 snd_ctl_led_init+0x40/0xf88 [snd_ctl_led] do_one_initcall+0x5c/0x318 do_init_module+0x9c/0x2b8 load_module+0x7e0/0x998 Close the race window by moving the adding of the LED to leds_list to after the led_init_core() call.

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb_pmd_shared() Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using mmu_gather)", v3. One functional fix, one performance regression fix, and two related comment fixes. I cleaned up my prototype I recently shared [1] for the performance fix, deferring most of the cleanups I had in the prototype to a later point. While doing that I identified the other things. The goal of this patch set is to be backported to stable trees "fairly" easily. At least patch #1 and #4. Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing Patch #2 + #3 are simple comment fixes that patch #4 interacts with. Patch #4 is a fix for the reported performance regression due to excessive IPI broadcasts during fork()+exit(). The last patch is all about TLB flushes, IPIs and mmu_gather. Read: complicated There are plenty of cleanups in the future to be had + one reasonable optimization on x86. But that's all out of scope for this series. Runtime tested, with a focus on fixing the performance regression using the original reproducer [2] on x86. This patch (of 4): We switched from (wrongly) using the page count to an independent shared count. Now, shared page tables have a refcount of 1 (excluding speculative references) and instead use ptdesc->pt_share_count to identify sharing. We didn't convert hugetlb_pmd_shared(), so right now, we would never detect a shared PMD table as such, because sharing/unsharing no longer touches the refcount of a PMD table. Page migration, like mbind() or migrate_pages() would allow for migrating folios mapped into such shared PMD tables, even though the folios are not exclusive. In smaps we would account them as "private" although they are "shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the pagemap interface. Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared().

In the Linux kernel, the following vulnerability has been resolved: bonding: limit BOND_MODE_8023AD to Ethernet devices BOND_MODE_8023AD makes sense for ARPHRD_ETHER only. syzbot reported: BUG: KASAN: global-out-of-bounds in __hw_addr_create net/core/dev_addr_lists.c:63 [inline] BUG: KASAN: global-out-of-bounds in __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118 Read of size 16 at addr ffffffff8bf94040 by task syz.1.3580/19497 CPU: 1 UID: 0 PID: 19497 Comm: syz.1.3580 Tainted: G L syzkaller #0 PREEMPT(full) Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:-1 [inline] kasan_check_range+0x2b0/0x2c0 mm/kasan/generic.c:200 __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105 __hw_addr_create net/core/dev_addr_lists.c:63 [inline] __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118 __dev_mc_add net/core/dev_addr_lists.c:868 [inline] dev_mc_add+0xa1/0x120 net/core/dev_addr_lists.c:886 bond_enslave+0x2b8b/0x3ac0 drivers/net/bonding/bond_main.c:2180 do_set_master+0x533/0x6d0 net/core/rtnetlink.c:2963 do_setlink+0xcf0/0x41c0 net/core/rtnetlink.c:3165 rtnl_changelink net/core/rtnetlink.c:3776 [inline] __rtnl_newlink net/core/rtnetlink.c:3935 [inline] rtnl_newlink+0x161c/0x1c90 net/core/rtnetlink.c:4072 rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6958 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x82f/0x9e0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0x21c/0x270 net/socket.c:742 ____

In the Linux kernel, the following vulnerability has been resolved: netrom: fix double-free in nr_route_frame() In nr_route_frame(), old_skb is immediately freed without checking if nr_neigh->ax25 pointer is NULL. Therefore, if nr_neigh->ax25 is NULL, the caller function will free old_skb again, causing a double-free bug. Therefore, to prevent this, we need to modify it to check whether nr_neigh->ax25 is NULL before freeing old_skb.

In the Linux kernel, the following vulnerability has been resolved: migrate: correct lock ordering for hugetlb file folios Syzbot has found a deadlock (analyzed by Lance Yang): 1) Task (5749): Holds folio_lock, then tries to acquire i_mmap_rwsem(read lock). 2) Task (5754): Holds i_mmap_rwsem(write lock), then tries to acquire folio_lock. migrate_pages() -> migrate_hugetlbs() -> unmap_and_move_huge_page() <- Takes folio_lock! -> remove_migration_ptes() -> __rmap_walk_file() -> i_mmap_lock_read() <- Waits for i_mmap_rwsem(read lock)! hugetlbfs_fallocate() -> hugetlbfs_punch_hole() <- Takes i_mmap_rwsem(write lock)! -> hugetlbfs_zero_partial_page() -> filemap_lock_hugetlb_folio() -> filemap_lock_folio() -> __filemap_get_folio <- Waits for folio_lock! The migration path is the one taking locks in the wrong order according to the documentation at the top of mm/rmap.c. So expand the scope of the existing i_mmap_lock to cover the calls to remove_migration_ptes() too. This is (mostly) how it used to be after commit c0d0381ade79. That was removed by 336bf30eb765 for both file & anon hugetlb pages when it should only have been removed for anon hugetlb pages.

In the Linux kernel, the following vulnerability has been resolved: uacce: fix cdev handling in the cleanup path When cdev_device_add fails, it internally releases the cdev memory, and if cdev_device_del is then executed, it will cause a hang error. To fix it, we check the return value of cdev_device_add() and clear uacce->cdev to avoid calling cdev_device_del in the uacce_remove.

In the Linux kernel, the following vulnerability has been resolved: gue: Fix skb memleak with inner IP protocol 0. syzbot reported skb memleak below. [0] The repro generated a GUE packet with its inner protocol 0. gue_udp_recv() returns -guehdr->proto_ctype for "resubmit" in ip_protocol_deliver_rcu(), but this only works with non-zero protocol number. Let's drop such packets. Note that 0 is a valid number (IPv6 Hop-by-Hop Option). I think it is not practical to encap HOPOPT in GUE, so once someone starts to complain, we could pass down a resubmit flag pointer to distinguish two zeros from the upper layer: * no error * resubmit HOPOPT [0] BUG: memory leak unreferenced object 0xffff888109695a00 (size 240): comm "syz.0.17", pid 6088, jiffies 4294943096 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 40 c2 10 81 88 ff ff 00 00 00 00 00 00 00 00 .@.............. backtrace (crc a84b336f): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x3b4/0x590 mm/slub.c:5270 __build_skb+0x23/0x60 net/core/skbuff.c:474 build_skb+0x20/0x190 net/core/skbuff.c:490 __tun_build_skb drivers/net/tun.c:1541 [inline] tun_build_skb+0x4a1/0xa40 drivers/net/tun.c:1636 tun_get_user+0xc12/0x2030 drivers/net/tun.c:1770 tun_chr_write_iter+0x71/0x120 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x45d/0x710 fs/read_write.c:686 ksys_write+0xa7/0x170 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: uacce: fix isolate sysfs check condition uacce supports the device isolation feature. If the driver implements the isolate_err_threshold_read and isolate_err_threshold_write callback functions, uacce will create sysfs files now. Users can read and configure the isolation policy through sysfs. Currently, sysfs files are created as long as either isolate_err_threshold_read or isolate_err_threshold_write callback functions are present. However, accessing a non-existent callback function may cause the system to crash. Therefore, intercept the creation of sysfs if neither read nor write exists; create sysfs if either is supported, but intercept unsupported operations at the call site.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: smbd: fix dma_unmap_sg() nents The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned.

In the Linux kernel, the following vulnerability has been resolved: iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source When simple_write_to_buffer() succeeds, it returns the number of bytes actually copied to the buffer. The code incorrectly uses 'count' as the index for null termination instead of the actual bytes copied. If count exceeds the buffer size, this leads to out-of-bounds write. Add a check for the count and use the return value as the index. The bug was validated using a demo module that mirrors the original code and was tested under QEMU. Pattern of the bug: - A fixed 64-byte stack buffer is filled using count. - If count > 64, the code still does buf[count] = '\0', causing an - out-of-bounds write on the stack. Steps for reproduce: - Opens the device node. - Writes 128 bytes of A to it. - This overflows the 64-byte stack buffer and KASAN reports the OOB. Found via static analysis. This is similar to the commit da9374819eb3 ("iio: backend: fix out-of-bound write")

In the Linux kernel, the following vulnerability has been resolved: intel_th: fix device leak on output open() Make sure to drop the reference taken when looking up the th device during output device open() on errors and on close(). Note that a recent commit fixed the leak in a couple of open() error paths but not all of them, and the reference is still leaking on successful open().

In the Linux kernel, the following vulnerability has been resolved: slimbus: core: fix device reference leak on report present Slimbus devices can be allocated dynamically upon reception of report-present messages. Make sure to drop the reference taken when looking up already registered devices. Note that this requires taking an extra reference in case the device has not yet been registered and has to be allocated.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix use-after-free in snd_usb_mixer_free() When snd_usb_create_mixer() fails, snd_usb_mixer_free() frees mixer->id_elems but the controls already added to the card still reference the freed memory. Later when snd_card_register() runs, the OSS mixer layer calls their callbacks and hits a use-after-free read. Call trace: get_ctl_value+0x63f/0x820 sound/usb/mixer.c:411 get_min_max_with_quirks.isra.0+0x240/0x1f40 sound/usb/mixer.c:1241 mixer_ctl_feature_info+0x26b/0x490 sound/usb/mixer.c:1381 snd_mixer_oss_build_test+0x174/0x3a0 sound/core/oss/mixer_oss.c:887 ... snd_card_register+0x4ed/0x6d0 sound/core/init.c:923 usb_audio_probe+0x5ef/0x2a90 sound/usb/card.c:1025 Fix by calling snd_ctl_remove() for all mixer controls before freeing id_elems. We save the next pointer first because snd_ctl_remove() frees the current element.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash on synthetic stacktrace field usage When creating a synthetic event based on an existing synthetic event that had a stacktrace field and the new synthetic event used that field a kernel crash occurred: ~# cd /sys/kernel/tracing ~# echo 's:stack unsigned long stack[];' > dynamic_events ~# echo 'hist:keys=prev_pid:s0=common_stacktrace if prev_state & 3' >> events/sched/sched_switch/trigger ~# echo 'hist:keys=next_pid:s1=$s0:onmatch(sched.sched_switch).trace(stack,$s1)' >> events/sched/sched_switch/trigger The above creates a synthetic event that takes a stacktrace when a task schedules out in a non-running state and passes that stacktrace to the sched_switch event when that task schedules back in. It triggers the "stack" synthetic event that has a stacktrace as its field (called "stack"). ~# echo 's:syscall_stack s64 id; unsigned long stack[];' >> dynamic_events ~# echo 'hist:keys=common_pid:s2=stack' >> events/synthetic/stack/trigger ~# echo 'hist:keys=common_pid:s3=$s2,i0=id:onmatch(synthetic.stack).trace(syscall_stack,$i0,$s3)' >> events/raw_syscalls/sys_exit/trigger The above makes another synthetic event called "syscall_stack" that attaches the first synthetic event (stack) to the sys_exit trace event and records the stacktrace from the stack event with the id of the system call that is exiting. When enabling this event (or using it in a historgram): ~# echo 1 > events/synthetic/syscall_stack/enable Produces a kernel crash! BUG: unable to handle page fault for address: 0000000000400010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 6 UID: 0 PID: 1257 Comm: bash Not tainted 6.16.3+deb14-amd64 #1 PREEMPT(lazy) Debian 6.16.3-1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:trace_event_raw_event_synth+0x90/0x380 Code

In the Linux kernel, the following vulnerability has been resolved: scsi: xen: scsiback: Fix potential memory leak in scsiback_remove() Memory allocated for struct vscsiblk_info in scsiback_probe() is not freed in scsiback_remove() leading to potential memory leaks on remove, as well as in the scsiback_probe() error paths. Fix that by freeing it in scsiback_remove().

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: cap TX credit to local buffer size The virtio transports derives its TX credit directly from peer_buf_alloc, which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value. On the host side this means that the amount of data we are willing to queue for a connection is scaled by a guest-chosen buffer size, rather than the host's own vsock configuration. A malicious guest can advertise a large buffer and read slowly, causing the host to allocate a correspondingly large amount of sk_buff memory. The same thing would happen in the guest with a malicious host, since virtio transports share the same code base. Introduce a small helper, virtio_transport_tx_buf_size(), that returns min(peer_buf_alloc, buf_alloc), and use it wherever we consume peer_buf_alloc. This ensures the effective TX window is bounded by both the peer's advertised buffer and our own buf_alloc (already clamped to buffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peer cannot force the other to queue more data than allowed by its own vsock settings. On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with 32 guest vsock connections advertising 2 GiB each and reading slowly drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only recovered after killing the QEMU process. That said, if QEMU memory is limited with cgroups, the maximum memory used will be limited. With this patch applied: Before: MemFree: ~61.6 GiB Slab: ~142 MiB SUnreclaim: ~117 MiB After 32 high-credit connections: MemFree: ~61.5 GiB Slab: ~178 MiB SUnreclaim: ~152 MiB Only ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guest remains responsive. Compatibility with non-virtio transports: - VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per socket based on the local vsk->buffer_* values; the remote side cann

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Avoid truncating memory addresses On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem allocations to be backed by addresses physical memory above the 32-bit address limit, as found while experimenting with larger VMSPLIT configurations. This caused the qemu virt model to crash in the GICv3 driver, which allocates the 'itt' object using GFP_KERNEL. Since all memory below the 4GB physical address limit is in ZONE_DMA in this configuration, kmalloc() defaults to higher addresses for ZONE_NORMAL, and the ITS driver stores the physical address in a 32-bit 'unsigned long' variable. Change the itt_addr variable to the correct phys_addr_t type instead, along with all other variables in this driver that hold a physical address. The gicv5 driver correctly uses u64 variables, while all other irqchip drivers don't call virt_to_phys or similar interfaces. It's expected that other device drivers have similar issues, but fixing this one is sufficient for booting a virtio based guest.

In the Linux kernel, the following vulnerability has been resolved: be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is set to false, the driver may request the PMAC_ID from the firmware of the network card, and this function will store that PMAC_ID at the provided address pmac_id. This is the contract of this function. However, there is a location within the driver where both pmac_id_valid == false and pmac_id == NULL are being passed. This could result in dereferencing a NULL pointer. To resolve this issue, it is necessary to pass the address of a stub variable to the function.

In the Linux kernel, the following vulnerability has been resolved: fou: Don't allow 0 for FOU_ATTR_IPPROTO. fou_udp_recv() has the same problem mentioned in the previous patch. If FOU_ATTR_IPPROTO is set to 0, skb is not freed by fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu(). Let's forbid 0 for FOU_ATTR_IPPROTO.

In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error In commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"), the URB was re-anchored before usb_submit_urb() in gs_usb_receive_bulk_callback() to prevent a leak of this URB during cleanup. However, this patch did not take into account that usb_submit_urb() could fail. The URB remains anchored and usb_kill_anchored_urbs(&parent->rx_submitted) in gs_can_close() loops infinitely since the anchor list never becomes empty. To fix the bug, unanchor the URB when an usb_submit_urb() error occurs, also print an info message.

In the Linux kernel, the following vulnerability has been resolved: net: phy: intel-xway: fix OF node refcount leakage Automated review spotted am OF node reference count leakage when checking if the 'leds' child node exists. Call of_put_node() to correctly maintain the refcount.

In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In mcba_usb_probe() -> mcba_usb_start(), the URBs for USB-in transfers are allocated, added to the priv->rx_submitted anchor and submitted. In the complete callback mcba_usb_read_bulk_callback(), the URBs are processed and resubmitted. In mcba_usb_close() -> mcba_urb_unlink() the URBs are freed by calling usb_kill_anchored_urbs(&priv->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the mcba_usb_read_bulk_callback()to the priv->rx_submitted anchor.

In the Linux kernel, the following vulnerability has been resolved: gpio: cdev: Fix resource leaks on errors in lineinfo_changed_notify() On error handling paths, lineinfo_changed_notify() doesn't free the allocated resources which results leaks. Fix it.

In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Fix buffer overflow in config retrieval The scarlett2_usb_get_config() function has a logic error in the endianness conversion code that can cause buffer overflows when count > 1. The code checks `if (size == 2)` where `size` is the total buffer size in bytes, then loops `count` times treating each element as u16 (2 bytes). This causes the loop to access `count * 2` bytes when the buffer only has `size` bytes allocated. Fix by checking the element size (config_item->size) instead of the total buffer size. This ensures the endianness conversion matches the actual element type.

In the Linux kernel, the following vulnerability has been resolved: mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge Patch series "mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge", v2. Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") introduced the ability to merge previously unavailable VMA merge scenarios. However, it is handling merges incorrectly when it comes to mremap() of a faulted VMA adjacent to an unfaulted VMA. The issues arise in three cases: 1. Previous VMA unfaulted: copied -----| v |-----------|.............| | unfaulted |(faulted VMA)| |-----------|.............| prev 2. Next VMA unfaulted: copied -----| v |.............|-----------| |(faulted VMA)| unfaulted | |.............|-----------| next 3. Both adjacent VMAs unfaulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| unfaulted | |-----------|.............|-----------| prev next This series fixes each of these cases, and introduces self tests to assert that the issues are corrected. I also test a further case which was already handled, to assert that my changes continues to correctly handle it: 4. prev unfaulted, next faulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| faulted | |-----------|.............|-----------| prev next This bug was discovered via a syzbot report, linked to in the first patch in the series, I confirmed that this series fixes the bug. I also discovered that we are failing to check that the faulted VMA was not forked when merging a copied VMA in cases 1-3 above, an issue this series also addresses. I also added self tests to as

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix potential OOB access in audio mixer handling In the audio mixer handling code of ctxfi driver, the conf field is used as a kind of loop index, and it's referred in the index callbacks (amixer_index() and sum_index()). As spotted recently by fuzzers, the current code causes OOB access at those functions. | UBSAN: array-index-out-of-bounds in /build/reproducible-path/linux-6.17.8/sound/pci/ctxfi/ctamixer.c:347:48 | index 8 is out of range for type 'unsigned char [8]' After the analysis, the cause was found to be the lack of the proper (re-)initialization of conj field. This patch addresses those OOB accesses by adding the proper initializations of the loop indices.

In the Linux kernel, the following vulnerability has been resolved: can: esd_usb: esd_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In esd_usb_open(), the URBs for USB-in transfers are allocated, added to the dev->rx_submitted anchor and submitted. In the complete callback esd_usb_read_bulk_callback(), the URBs are processed and resubmitted. In esd_usb_close() the URBs are freed by calling usb_kill_anchored_urbs(&dev->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in esd_usb_close(). Fix the memory leak by anchoring the URB in the esd_usb_read_bulk_callback() to the dev->rx_submitted anchor.

In the Linux kernel, the following vulnerability has been resolved: net/sched: Enforce that teql can only be used as root qdisc Design intent of teql is that it is only supposed to be used as root qdisc. We need to check for that constraint. Although not important, I will describe the scenario that unearthed this issue for the curious. GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows: ROOT qdisc 1:0 (QFQ) ├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s └── class 1:2 (weight=1, lmax=1514) teql GangMin sends a packet which is enqueued to 1:1 (netem). Any invocation of dequeue by QFQ from this class will not return a packet until after 6.4s. In the meantime, a second packet is sent and it lands on 1:2. teql's enqueue will return success and this will activate class 1:2. Main issue is that teql only updates the parent visible qlen (sch->q.qlen) at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's peek always returns NULL), dequeue will never be called and thus the qlen will remain as 0. With that in mind, when GangMin updates 1:2's lmax value, the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's qlen was not incremented, qfq fails to deactivate the class, but still frees its pointers from the aggregate. So when the first packet is rescheduled after 6.4 seconds (netem's delay), a dangling pointer is accessed causing GangMin's causing a UAF.

In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: Fix memory corruption due to not set vif driver data size The struct ieee80211_vif contains trailing space for vif driver data, when struct ieee80211_vif is allocated, the total memory size that is allocated is sizeof(struct ieee80211_vif) + size of vif driver data. The size of vif driver data is set by each WiFi driver as needed. The RSI911x driver does not set vif driver data size, no trailing space for vif driver data is therefore allocated past struct ieee80211_vif . The RSI911x driver does however use the vif driver data to store its vif driver data structure "struct vif_priv". An access to vif->drv_priv leads to access out of struct ieee80211_vif bounds and corruption of some memory. In case of the failure observed locally, rsi_mac80211_add_interface() would write struct vif_priv *vif_info = (struct vif_priv *)vif->drv_priv; vif_info->vap_id = vap_idx. This write corrupts struct fq_tin member struct list_head new_flows . The flow = list_first_entry(head, struct fq_flow, flowchain); in fq_tin_reset() then reports non-NULL bogus address, which when accessed causes a crash. The trigger is very simple, boot the machine with init=/bin/sh , mount devtmpfs, sysfs, procfs, and then do "ip link set wlan0 up", "sleep 1", "ip link set wlan0 down" and the crash occurs. Fix this by setting the correct size of vif driver data, which is the size of "struct vif_priv", so that memory is allocated and the driver can store its driver data in it, instead of corrupting memory around it.

In the Linux kernel, the following vulnerability has been resolved: l2tp: Fix memleak in l2tp_udp_encap_recv(). syzbot reported memleak of struct l2tp_session, l2tp_tunnel, sock, etc. [0] The cited commit moved down the validation of the protocol version in l2tp_udp_encap_recv(). The new place requires an extra error handling to avoid the memleak. Let's call l2tp_session_put() there. [0]: BUG: memory leak unreferenced object 0xffff88810a290200 (size 512): comm "syz.0.17", pid 6086, jiffies 4294944299 hex dump (first 32 bytes): 7d eb 04 0c 00 00 00 00 01 00 00 00 00 00 00 00 }............... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc babb6a4f): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] __do_kmalloc_node mm/slub.c:5656 [inline] __kmalloc_noprof+0x3e0/0x660 mm/slub.c:5669 kmalloc_noprof include/linux/slab.h:961 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] l2tp_session_create+0x3a/0x3b0 net/l2tp/l2tp_core.c:1778 pppol2tp_connect+0x48b/0x920 net/l2tp/l2tp_ppp.c:755 __sys_connect_file+0x7a/0xb0 net/socket.c:2089 __sys_connect+0xde/0x110 net/socket.c:2108 __do_sys_connect net/socket.c:2114 [inline] __se_sys_connect net/socket.c:2111 [inline] __x64_sys_connect+0x1c/0x30 net/socket.c:2111 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: regmap: Fix race condition in hwspinlock irqsave routine Previously, the address of the shared member '&map->spinlock_flags' was passed directly to 'hwspin_lock_timeout_irqsave'. This creates a race condition where multiple contexts contending for the lock could overwrite the shared flags variable, potentially corrupting the state for the current lock owner. Fix this by using a local stack variable 'flags' to store the IRQ state temporarily.

In the Linux kernel, the following vulnerability has been resolved: Octeontx2-af: Add proper checks for fwdata firmware populates MAC address, link modes (supported, advertised) and EEPROM data in shared firmware structure which kernel access via MAC block(CGX/RPM). Accessing fwdata, on boards booted with out MAC block leading to kernel panics. Internal error: Oops: 0000000096000005 [#1] SMP [ 10.460721] Modules linked in: [ 10.463779] CPU: 0 UID: 0 PID: 174 Comm: kworker/0:3 Not tainted 6.19.0-rc5-00154-g76ec646abdf7-dirty #3 PREEMPT [ 10.474045] Hardware name: Marvell OcteonTX CN98XX board (DT) [ 10.479793] Workqueue: events work_for_cpu_fn [ 10.484159] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 10.491124] pc : rvu_sdp_init+0x18/0x114 [ 10.495051] lr : rvu_probe+0xe58/0x1d18

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix potential underflow in virtio_transport_get_credit() The credit calculation in virtio_transport_get_credit() uses unsigned arithmetic: ret = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt); If the peer shrinks its advertised buffer (peer_buf_alloc) while bytes are in flight, the subtraction can underflow and produce a large positive value, potentially allowing more data to be queued than the peer can handle. Reuse virtio_transport_has_space() which already handles this case and add a comment to make it clear why we are doing that. [Stefano: use virtio_transport_has_space() instead of duplicating the code] [Stefano: tweak the commit message]

In the Linux kernel, the following vulnerability has been resolved: spi: spi-sprd-adi: Fix double free in probe error path The driver currently uses spi_alloc_host() to allocate the controller but registers it using devm_spi_register_controller(). If devm_register_restart_handler() fails, the code jumps to the put_ctlr label and calls spi_controller_put(). However, since the controller was registered via a devm function, the device core will automatically call spi_controller_put() again when the probe fails. This results in a double-free of the spi_controller structure. Fix this by switching to devm_spi_alloc_host() and removing the manual spi_controller_put() call.

In the Linux kernel, the following vulnerability has been resolved: iommu/io-pgtable-arm: fix size_t signedness bug in unmap path __arm_lpae_unmap() returns size_t but was returning -ENOENT (negative error code) when encountering an unmapped PTE. Since size_t is unsigned, -ENOENT (typically -2) becomes a huge positive value (0xFFFFFFFFFFFFFFFE on 64-bit systems). This corrupted value propagates through the call chain: __arm_lpae_unmap() returns -ENOENT as size_t -> arm_lpae_unmap_pages() returns it -> __iommu_unmap() adds it to iova address -> iommu_pgsize() triggers BUG_ON due to corrupted iova This can cause IOVA address overflow in __iommu_unmap() loop and trigger BUG_ON in iommu_pgsize() from invalid address alignment. Fix by returning 0 instead of -ENOENT. The WARN_ON already signals the error condition, and returning 0 (meaning "nothing unmapped") is the correct semantic for size_t return type. This matches the behavior of other io-pgtable implementations (io-pgtable-arm-v7s, io-pgtable-dart) which return 0 on error conditions.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix recvmsg() unconditional requeue If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at the front of the recvmsg queue already has its mutex locked, it requeues the call - whether or not the call is already queued. The call may be on the queue because MSG_PEEK was also passed and so the call was not dequeued or because the I/O thread requeued it. The unconditional requeue may then corrupt the recvmsg queue, leading to things like UAFs or refcount underruns. Fix this by only requeuing the call if it isn't already on the queue - and moving it to the front if it is already queued. If we don't queue it, we have to put the ref we obtained by dequeuing it. Also, MSG_PEEK doesn't dequeue the call so shouldn't call rxrpc_notify_socket() for the call if we didn't use up all the data on the queue, so fix that also.

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: Fix memory leak in wbrf_record() The tmp buffer is allocated using kcalloc() but is not freed if acpi_evaluate_dsm() fails. This causes a memory leak in the error path. Fix this by explicitly freeing the tmp buffer in the error handling path of acpi_evaluate_dsm().

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: avoid possible NULL deref tcf_ife_encode() must make sure ife_encode() does not return NULL. syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:ife_tlv_meta_encode+0x41/0xa0 net/ife/ife.c:166 CPU: 3 UID: 0 PID: 8990 Comm: syz.0.696 Not tainted syzkaller #0 PREEMPT(full) Call Trace: <TASK> ife_encode_meta_u32+0x153/0x180 net/sched/act_ife.c:101 tcf_ife_encode net/sched/act_ife.c:841 [inline] tcf_ife_act+0x1022/0x1de0 net/sched/act_ife.c:877 tc_act include/net/tc_wrapper.h:130 [inline] tcf_action_exec+0x1c0/0xa20 net/sched/act_api.c:1152 tcf_exts_exec include/net/pkt_cls.h:349 [inline] mall_classify+0x1a0/0x2a0 net/sched/cls_matchall.c:42 tc_classify include/net/tc_wrapper.h:197 [inline] __tcf_classify net/sched/cls_api.c:1764 [inline] tcf_classify+0x7f2/0x1380 net/sched/cls_api.c:1860 multiq_classify net/sched/sch_multiq.c:39 [inline] multiq_enqueue+0xe0/0x510 net/sched/sch_multiq.c:66 dev_qdisc_enqueue+0x45/0x250 net/core/dev.c:4147 __dev_xmit_skb net/core/dev.c:4262 [inline] __dev_queue_xmit+0x2998/0x46c0 net/core/dev.c:4798

In the Linux kernel, the following vulnerability has been resolved: uacce: ensure safe queue release with state management Directly calling `put_queue` carries risks since it cannot guarantee that resources of `uacce_queue` have been fully released beforehand. So adding a `stop_queue` operation for the UACCE_CMD_PUT_Q command and leaving the `put_queue` operation to the final resource release ensures safety. Queue states are defined as follows: - UACCE_Q_ZOMBIE: Initial state - UACCE_Q_INIT: After opening `uacce` - UACCE_Q_STARTED: After `start` is issued via `ioctl` When executing `poweroff -f` in virt while accelerator are still working, `uacce_fops_release` and `uacce_remove` may execute concurrently. This can cause `uacce_put_queue` within `uacce_fops_release` to access a NULL `ops` pointer. Therefore, add state checks to prevent accessing freed pointers.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs attributes: 1. Off-by-one error: The loop condition used '<=' instead of '<', causing access beyond array bounds. Since array indices are 0-based and go from 0 to instances_count-1, the loop should use '<'. 2. Missing NULL check: The code dereferenced attr_name_kobj->name without checking if attr_name_kobj was NULL, causing a null pointer dereference in min_length_show() and other attribute show functions. The panic occurred when fwupd tried to read BIOS configuration attributes: Oops: general protection fault [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg] Add a NULL check for attr_name_kobj before dereferencing and corrects the loop boundary to match the pattern used elsewhere in the driver.

In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb: kvaser_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In kvaser_usb_set_{,data_}bittiming() -> kvaser_usb_setup_rx_urbs(), the URBs for USB-in transfers are allocated, added to the dev->rx_submitted anchor and submitted. In the complete callback kvaser_usb_read_bulk_callback(), the URBs are processed and resubmitted. In kvaser_usb_remove_interfaces() the URBs are freed by calling usb_kill_anchored_urbs(&dev->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the kvaser_usb_read_bulk_callback() to the dev->rx_submitted anchor.

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject too-short AAD (assoclen<8) to match ESP/ESN spec authencesn assumes an ESP/ESN-formatted AAD. When assoclen is shorter than the minimum expected length, crypto_authenc_esn_decrypt() can advance past the end of the destination scatterlist and trigger a NULL pointer dereference in scatterwalk_map_and_copy(), leading to a kernel panic (DoS). Add a minimum AAD length check to fail fast on invalid inputs.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Sanitize payload size to prevent member overflow In qla27xx_copy_fpin_pkt() and qla27xx_copy_multiple_pkt(), the frame_size reported by firmware is used to calculate the copy length into item->iocb. However, the iocb member is defined as a fixed-size 64-byte array within struct purex_item. If the reported frame_size exceeds 64 bytes, subsequent memcpy calls will overflow the iocb member boundary. While extra memory might be allocated, this cross-member write is unsafe and triggers warnings under CONFIG_FORTIFY_SOURCE. Fix this by capping total_bytes to the size of the iocb member (64 bytes) before allocation and copying. This ensures all copies remain within the bounds of the destination structure member.

In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: ems_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In ems_usb_open(), the URBs for USB-in transfers are allocated, added to the dev->rx_submitted anchor and submitted. In the complete callback ems_usb_read_bulk_callback(), the URBs are processed and resubmitted. In ems_usb_close() the URBs are freed by calling usb_kill_anchored_urbs(&dev->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in ems_usb_close(). Fix the memory leak by anchoring the URB in the ems_usb_read_bulk_callback() to the dev->rx_submitted anchor.

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: Coalesce only linear skb vsock/virtio common tries to coalesce buffers in rx queue: if a linear skb (with a spare tail room) is followed by a small skb (length limited by GOOD_COPY_LEN = 128), an attempt is made to join them. Since the introduction of MSG_ZEROCOPY support, assumption that a small skb will always be linear is incorrect. In the zerocopy case, data is lost and the linear skb is appended with uninitialized kernel memory. Of all 3 supported virtio-based transports, only loopback-transport is affected. G2H virtio-transport rx queue operates on explicitly linear skbs; see virtio_vsock_alloc_linear_skb() in virtio_vsock_rx_fill(). H2G vhost-transport may allocate non-linear skbs, but only for sizes that are not considered for coalescence; see PAGE_ALLOC_COSTLY_ORDER in virtio_vsock_alloc_skb(). Ensure only linear skbs are coalesced. Note that skb_tailroom(last_skb) > 0 guarantees last_skb is linear.

In the Linux kernel, the following vulnerability has been resolved: uacce: implement mremap in uacce_vm_ops to return -EPERM The current uacce_vm_ops does not support the mremap operation of vm_operations_struct. Implement .mremap to return -EPERM to remind users. The reason we need to explicitly disable mremap is that when the driver does not implement .mremap, it uses the default mremap method. This could lead to a risk scenario: An application might first mmap address p1, then mremap to p2, followed by munmap(p1), and finally munmap(p2). Since the default mremap copies the original vma's vm_private_data (i.e., q) to the new vma, both munmap operations would trigger vma_close, causing q->qfr to be freed twice(qfr will be set to null here, so repeated release is ok).

In the Linux kernel, the following vulnerability has been resolved: iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver at91_adc_interrupt can call at91_adc_touch_data_handler function to start the work by schedule_work(&st->touch_st.workq). If we remove the module which will call at91_adc_remove to make cleanup, it will free indio_dev through iio_device_unregister but quite a bit later. While the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | at91_adc_workq_handler at91_adc_remove | iio_device_unregister(indio_dev) | //free indio_dev a bit later | | iio_push_to_buffers(indio_dev) | //use indio_dev Fix it by ensuring that the work is canceled before proceeding with the cleanup in at91_adc_remove.

In the Linux kernel, the following vulnerability has been resolved: iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without event detection The st_lsm6dsx_acc_channels array of struct iio_chan_spec has a non-NULL event_spec field, indicating support for IIO events. However, event detection is not supported for all sensors, and if userspace tries to configure accelerometer wakeup events on a sensor device that does not support them (e.g. LSM6DS0), st_lsm6dsx_write_event() dereferences a NULL pointer when trying to write to the wakeup register. Define an additional struct iio_chan_spec array whose members have a NULL event_spec field, and use this array instead of st_lsm6dsx_acc_channels for sensors without event detection capability.

In the Linux kernel, the following vulnerability has been resolved: w1: therm: Fix off-by-one buffer overflow in alarms_store The sysfs buffer passed to alarms_store() is allocated with 'size + 1' bytes and a NUL terminator is appended. However, the 'size' argument does not account for this extra byte. The original code then allocated 'size' bytes and used strcpy() to copy 'buf', which always writes one byte past the allocated buffer since strcpy() copies until the NUL terminator at index 'size'. Fix this by parsing the 'buf' parameter directly using simple_strtoll() without allocating any intermediate memory or string copying. This removes the overflow while simplifying the code.