CVEs

Simple Job Script contains an SQL injection vulnerability that allows unauthenticated attackers to manipulate database queries by injecting SQL code through the job_id parameter. Attackers can send POST requests to get_job_applications_ajax.php with malicious job_id values to bypass authentication, extract sensitive data, or modify database contents.

Simple Job Script contains an SQL injection vulnerability that allows unauthenticated attackers to manipulate database queries by injecting SQL code through the landing_location parameter. Attackers can send POST requests to the searched endpoint with malicious SQL payloads to bypass authentication and extract sensitive database information.

A vulnerability in a small subset of CLI commands that are used on Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to craft Lua code that could be used on the underlying operating system as root. This vulnerability exists because user-provided input is not properly sanitized. An attacker could exploit this vulnerability by crafting valid Lua code and submitting it as a malicious parameter for a CLI command. A successful exploit could allow the attacker to inject Lua code, which could lead to arbitrary code execution as the root user. To exploit this vulnerability, an attacker must have valid Administrator credentials.

A vulnerability in the implementation of the proprietary SSH stack with SSH key-based authentication in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to log in to a Cisco Secure Firewall ASA device and execute commands as a specific user. This vulnerability is due to insufficient validation of user input during the SSH authentication phase. An attacker could exploit this vulnerability by submitting crafted input during SSH authentication to an affected device. A successful exploit could allow the attacker to log in to the device as a specific user without the private SSH key of that user. To exploit this vulnerability, the attacker must possess a valid username and the associated public key. The private key is not required. Notes: Exploitation of this vulnerability does not provide the attacker with root access. The authentication, authorization, and accounting (AAA) configuration command auto-enable is not affected by this vulnerability.  

Dell Device Management Agent (DDMA), versions prior to 26.02, contain an Incorrect Authorization vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges.

A vulnerability in the REST API of Cisco Secure FMC Software could allow an authenticated, remote attacker to conduct SQL injection attacks on an affected system. This vulnerability is due to inadequate validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted requests to an affected device. A successful exploit could allow the attacker to obtain read access to the database and read certain files on the underlying operating system. To exploit this vulnerability, the attacker would need valid user credentials with any of the following roles: Administrator Security approver Access admin Network admin

Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to incomplete parsing of the SSL handshake ingress packets. An attacker could exploit this vulnerability by sending crafted SSL handshake packets. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when the Snort 3 Detection Engine restarts unexpectedly.

Dell Device Management Agent (DDMA), versions prior to 26.02, contain an Improper Check for Unusual or Exceptional Conditions vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Denial of Service.

Craft is a content management system (CMS). Prior to 5.9.0-beta.2 and 4.17.0-beta.2, the actionSendActivationEmail() endpoint is accessible to unauthenticated users and does not require a permission check for pending users. An attacker with no prior access can trigger activation emails for any pending user account by knowing or guessing the user ID. If the attacker controls the target user’s email address, they can activate the account and gain access to the system. This vulnerability is fixed in 5.9.0-beta.2 and 4.17.0-beta.2.

Craft is a content management system (CMS). Prior to 5.8.22 and 4.16.18, it is possible to craft a malicious payload using the Twig map filter in text fields that accept Twig input under Settings in the Craft control panel or using the System Messages utility, which could lead to a RCE. For this to work, you must have administrator access to the Craft Control Panel, and allowAdminChanges must be enabled for this to work, which is against our recommendations for any non-dev environment. Alternatively, you can have a non-administrator account with allowAdminChanges disabled, but you have access to the System Messages utility. Users should update to the patched versions (5.8.22 and 4.16.18) to mitigate the issue.

Craft is a content management system (CMS). Prior to 5.9.0-beta.1 and 4.17.0-beta.1, Craft CMS implements a blocklist to prevent potentially dangerous PHP functions from being called via Twig non-Closure arrow functions. In order to be able to successfully execute this attack, you need to either have allowAdminChanges enabled on production, or a compromised admin account, or an account with access to the System Messages utility. Several PHP functions are not included in the blocklist, which could allow malicious actors with the required permissions to execute various types of payloads, including RCEs, arbitrary file reads, SSRFs, and SSTIs. This vulnerability is fixed in 5.9.0-beta.1 and 4.17.0-beta.1.

Craft is a content management system (CMS). Prior to 5.9.0-beta.1 and 4.17.0-beta.1, the "Duplicate" entry action does not properly verify if the user has permission to perform this action on the specific target elements. Even with only "View Entries" permission (where the "Duplicate" action is restricted in the UI), a user can bypass this restriction by sending a direct request. Furthermore, this vulnerability allows duplicating other users' entries by specifying their Entry IDs. Since Entry IDs are incremental, an attacker can trivially brute-force these IDs to duplicate and access restricted content across the system. This vulnerability is fixed in 5.9.0-beta.1 and 4.17.0-beta.1.

Craft is a content management system (CMS). Prior to 4.17.0-beta.1 and 5.9.0-beta.1, the entry creation process allows for Mass Assignment of the authorId attribute. A user with "Create Entries" permission can inject the authorIds[] (or authorId) parameter into the POST request, which the backend processes without verifying if the current user is authorized to assign authorship to others. Normally, this field is not present in the request for users without the necessary permissions. By manually adding this parameter, an attacker can attribute the new entry to any user, including Admins. This effectively "spoofs" the authorship. This vulnerability is fixed in 4.17.0-beta.1 and 5.9.0-beta.1.

Craft is a content management system (CMS). Prior to 4.17.0-beta.1 and 5.9.0-beta.1, an authenticated administrator can achieve Remote Code Execution (RCE) by injecting a Server-Side Template Injection (SSTI) payload into Twig template fields (e.g., Email Templates). By calling the craft.app.fs.write() method, an attacker can write a malicious PHP script to a web-accessible directory and subsequently access it via the browser to execute arbitrary system commands. This vulnerability is fixed in 4.17.0-beta.1 and 5.9.0-beta.1.

Craft is a content management system (CMS). Prior to 4.17.0-beta.1 and 5.9.0-beta.1, the GraphQL directive @parseRefs, intended to parse internal reference tags (e.g., {user:1:email}), can be abused by both authenticated users and unauthenticated guests (if a Public Schema is enabled) to access sensitive attributes of any element in the CMS. The implementation in Elements::parseRefs fails to perform authorization checks, allowing attackers to read data they are not authorized to view. This vulnerability is fixed in 4.17.0-beta.1 and 5.9.0-beta.1.

Multer is a node.js middleware for handling `multipart/form-data`. A vulnerability in Multer prior to version 2.1.1 allows an attacker to trigger a Denial of Service (DoS) by sending malformed requests, potentially causing stack overflow. Users should upgrade to version 2.1.1 to receive a patch. No known workarounds are available.

Craft is a content management system (CMS). There is an authenticated admin RCE in Craft CMS 5.8.21 via Server-Side Template Injection using the create() Twig function combined with a Symfony Process gadget chain. The create() Twig function exposes Craft::createObject(), which allows instantiation of arbitrary PHP classes with constructor arguments. Combined with the bundled symfony/process dependency, this enables RCE. This bypasses the fix implemented for CVE-2025-57811 (patched in 5.8.7). This vulnerability is fixed in 5.9.0-beta.1 and 4.17.0-beta.1.

Docker CLI for Windows searches for plugin binaries in C:\ProgramData\Docker\cli-plugins, a directory that does not exist by default. A low-privileged attacker can create this directory and place malicious CLI plugin binaries (docker-compose.exe, docker-buildx.exe, etc.) that are executed when a victim user opens Docker Desktop or invokes Docker CLI plugin features, and allow privilege-escalation if the docker CLI is executed as a privileged user. This issue affects Docker CLI: through 29.1.5 and Windows binaries acting as a CLI-plugin manager using the github.com/docker/cli/cli-plugins/manager https://pkg.go.dev/github.com/docker/cli@v29.1.5+incompatible/cli-plugins/manager  package, such as Docker Compose. This issue does not impact non-Windows binaries, and projects not using the plugin-manager code.

A vulnerability has been identified where an attacker connecting to an access point as a standard wired or wireless client can impersonate a gateway by leveraging an address-based spoofing technique. Successful exploitation enables the redirection of data streams, allowing for the interception or modification of traffic intended for the legitimate network gateway via a Machine-in-the-Middle (MitM) position.

A vulnerability in the client isolation mechanism may allow an attacker to bypass Layer 2 (L2) communication restrictions between clients and redirect traffic at Layer 3 (L3). In addition to bypassing policy enforcement, successful exploitation - when combined with a port-stealing attack - may enable a bi-directional Machine-in-the-Middle (MitM) attack.

A vulnerability in the packet processing logic may allow an authenticated attacker to craft and transmit a malicious Wi-Fi frame that causes an Access Point (AP) to classify the frame as group-addressed traffic and re-encrypt it using the Group Temporal Key (GTK) associated with the victim's BSSID. Successful exploitation may enable GTK-independent traffic injection and, when combined with a port-stealing technique, allows an attacker to redirect intercepted traffic to facilitate machine-in-the-middle (MitM) attacks across BSSID boundaries.

A technique has been identified that adapts a known port-stealing method to Wi-Fi environments that use multiple BSSIDs. By leveraging the relationship between BSSIDs and their associated virtual ports, an attacker could potentially bypass inter-BSSID isolation controls. Successful exploitation may enable an attacker to redirect and intercept the victim's network traffic, potentially resulting in eavesdropping, session hijacking, or denial of service.

A vulnerability has been identified in a standardized wireless roaming protocol that could enable a malicious actor to install an attacker-controlled Group Temporal Key (GTK) on a client device. Successful exploitation of this vulnerability could allow a remote malicious actor to perform unauthorized frame injection, bypass client isolation, interfere with cross-client traffic, and compromise network segmentation, integrity, and confidentiality.

A vulnerability has been identified in the wireless encryption handling of Wi-Fi transmissions. A malicious actor can generate shared-key authenticated transmissions containing targeted payloads while impersonating the identity of a primary BSSID.Successful exploitation allows for the delivery of tampered data to specific endpoints, bypassing standard cryptographic separation.

Dell Device Management Agent (DDMA), versions prior to 26.02, contain a Plaintext Storage of Password vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Unauthorized Access.

2N Access Commander application version 3.4.2 and prior returns HTTP 500 Internal Server Error responses when receiving malformed or manipulated requests, indicating improper handling of invalid input and potential security or availability impacts.

2N Access Commander version 3.4.2 and prior improperly invalidates session tokens, allowing multiple session cookies to remain active after logout in web application.

Improper validation of API end-point in 2N Access Commander version 3.4.2 and prior allows attacker to bypass password policy for backup file encryption. This vulnerability can only be exploited after authenticating with administrator privileges.

2N Access Commander version 3.4.1 and prior is vulnerable to log pollution. Certain parameters sent over API may be included in the logs without prior validation or sanitisation. This vulnerability can only be exploited after authenticating with administrator privileges.

A vulnerability was recently discovered in the rpc.mountd daemon in the nfs-utils package for Linux, that allows a NFSv3 client to escalate the privileges assigned to it in the /etc/exports file at mount time. In particular, it allows the client to access any subdirectory or subtree of an exported directory, regardless of the set file permissions, and regardless of any 'root_squash' or 'all_squash' attributes that would normally be expected to apply to that client.

API endpoint for user synchronization in 2N Access Commander version 3.4.1 did not have a sufficient input validation allowing for OS command injection. This vulnerability can only be exploited after authenticating with administrator privileges.

A vulnerability has been identified within the Rancher Backup Operator, resulting in the leakage of S3 tokens (both accessKey and secretKey) into the rancher-backup-operator pod's logs.

In the Linux kernel, the following vulnerability has been resolved: romfs: check sb_set_blocksize() return value romfs_fill_super() ignores the return value of sb_set_blocksize(), which can fail if the requested block size is incompatible with the block device's configuration. This can be triggered by setting a loop device's block size larger than PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs filesystem on that device. When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the device has logical_block_size=32768, bdev_validate_blocksize() fails because the requested size is smaller than the device's logical block size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and continues mounting. The superblock's block size remains at the device's logical block size (32768). Later, when sb_bread() attempts I/O with this oversized block size, it triggers a kernel BUG in folio_set_bh(): kernel BUG at fs/buffer.c:1582! BUG_ON(size > PAGE_SIZE); Fix by checking the return value of sb_set_blocksize() and failing the mount with -EINVAL if it returns 0.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: classmate-laptop: Add missing NULL pointer checks In a few places in the Classmate laptop driver, code using the accel object may run before that object's address is stored in the driver data of the input device using it. For example, cmpc_accel_sensitivity_store_v4() is the "show" method of cmpc_accel_sensitivity_attr_v4 which is added in cmpc_accel_add_v4(), before calling dev_set_drvdata() for inputdev->dev. If the sysfs attribute is accessed prematurely, the dev_get_drvdata(&inputdev->dev) call in in cmpc_accel_sensitivity_store_v4() returns NULL which leads to a NULL pointer dereference going forward. Moreover, sysfs attributes using the input device are added before initializing that device by cmpc_add_acpi_notify_device() and if one of them is accessed before running that function, a NULL pointer dereference will occur. For example, cmpc_accel_sensitivity_attr_v4 is added before calling cmpc_add_acpi_notify_device() and if it is read prematurely, the dev_get_drvdata(&acpi->dev) call in cmpc_accel_sensitivity_show_v4() returns NULL which leads to a NULL pointer dereference going forward. Fix this by adding NULL pointer checks in all of the relevant places.

In the Linux kernel, the following vulnerability has been resolved: fbdev: smscufx: properly copy ioctl memory to kernelspace The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from userspace to kernelspace, and instead directly references the memory, which can cause problems if invalid data is passed from userspace. Fix this all up by correctly copying the memory before accessing it within the kernel.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix out-of-bounds access in sysfs attribute read/write Some f2fs sysfs attributes suffer from out-of-bounds memory access and incorrect handling of integer values whose size is not 4 bytes. For example: vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out vm:~# cat /sys/fs/f2fs/vde/carve_out 65537 vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold 1 carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit integer. However, the sysfs interface allows setting it to a value larger than 255, resulting in an out-of-range update. atgc_age_threshold maps to {struct atgc_management}->age_threshold, which is a 64-bit integer, but its sysfs interface cannot correctly set values larger than UINT_MAX. The root causes are: 1. __sbi_store() treats all default values as unsigned int, which prevents updating integers larger than 4 bytes and causes out-of-bounds writes for integers smaller than 4 bytes. 2. f2fs_sbi_show() also assumes all default values are unsigned int, leading to out-of-bounds reads and incorrect access to integers larger than 4 bytes. This patch introduces {struct f2fs_attr}->size to record the actual size of the integer associated with each sysfs attribute. With this information, sysfs read and write operations can correctly access and update values according to their real data size, avoiding memory corruption and truncation.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid UAF in f2fs_write_end_io() As syzbot reported an use-after-free issue in f2fs_write_end_io(). It is caused by below race condition: loop device umount - worker_thread - loop_process_work - do_req_filebacked - lo_rw_aio - lo_rw_aio_complete - blk_mq_end_request - blk_update_request - f2fs_write_end_io - dec_page_count - folio_end_writeback - kill_f2fs_super - kill_block_super - f2fs_put_super : free(sbi) : get_pages(, F2FS_WB_CP_DATA) accessed sbi which is freed In kill_f2fs_super(), we will drop all page caches of f2fs inodes before call free(sbi), it guarantee that all folios should end its writeback, so it should be safe to access sbi before last folio_end_writeback(). Let's relocate ckpt thread wakeup flow before folio_end_writeback() to resolve this issue.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid mapping wrong physical block for swapfile Xiaolong Guo reported a f2fs bug in bugzilla [1] [1] https://bugzilla.kernel.org/show_bug.cgi?id=220951 Quoted: "When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+, the system experiences data corruption leading to either: 1 dm-verity corruption errors and device reboot 2 F2FS node corruption errors and boot hangs The issue occurs specifically when: 1 Using F2FS filesystem (ext4 is unaffected) 2 Swapfile size is less than F2FS section size (2MB) 3 Swapfile has fragmented physical layout (multiple non-contiguous extents) 4 Kernel version is 6.6+ (6.1 is unaffected) The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the first extent of a small swapfile (< 2MB) is not aligned to section boundaries, the function incorrectly treats it as the last extent, failing to map subsequent extents. This results in incorrect swap_extent creation where only the first extent is mapped, causing subsequent swap writes to overwrite wrong physical locations (other files' data). Steps to Reproduce 1 Setup a device with F2FS-formatted userdata partition 2 Compile stress-ng from https://github.com/ColinIanKing/stress-ng 3 Run swap stress test: (Android devices) adb shell "cd /data/stressng; ./stress-ng-64 --metrics-brief --timeout 60 --swap 0" Log: 1 Ftrace shows in kernel 6.6, only first extent is mapped during second f2fs_map_blocks call in check_swap_activate(): stress-ng-swap-8990: f2fs_map_blocks: ino=11002, file offset=0, start blkaddr=0x43143, len=0x1 (Only 4KB mapped, not the full swapfile) 2 in kernel 6.1, both extents are correctly mapped: stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=0, start blkaddr=0x13cd4, len=0x1 stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=1, start blkaddr=0x60c84b, len=0xff The problematic code is in check_swap_activate(): if ((pblock - SM_I

In the Linux kernel, the following vulnerability has been resolved: Revert "f2fs: block cache/dio write during f2fs_enable_checkpoint()" This reverts commit 196c81fdd438f7ac429d5639090a9816abb9760a. Original patch may cause below deadlock, revert it. write remount - write_begin - lock_page --- lock A - prepare_write_begin - f2fs_map_lock - f2fs_enable_checkpoint - down_write(cp_enable_rwsem) --- lock B - sync_inode_sb - writepages - lock_page --- lock A - down_read(cp_enable_rwsem) --- lock A

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix bsg_done() causing double free Kernel panic observed on system, [5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000 [5353358.825194] #PF: supervisor write access in kernel mode [5353358.825195] #PF: error_code(0x0002) - not-present page [5353358.825196] PGD 100006067 P4D 0 [5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI [5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1 [5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025 [5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10 [5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246 [5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000 [5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000 [5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000 [5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090 [5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000 [5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000 [5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0 [5353358.825221] PKRU: 55555554 [5353358.825222] Call Trace: [5353358.825223] <TASK> [5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825232] ? sg_copy_buffer+0xc8/0x110 [5353358.825236] ? __die_body.cold+0x8/0xd [5353358.825238] ? page_fault_oops+0x134/0x170 [5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110 [5353358.825244] ? exc_page_fault+0xa8/0x150 [5353358.825247] ? asm_exc_page_fault+0x22/0x30 [5353358.825252] ? memcpy_erms+0x6/0x10 [5353358.825253] sg_cop

The server certificate was not verified when an Arc agent connected to a Guardian or CMC. A malicious actor could perform a man-in-the-middle attack and intercept the communication between the Arc agent and the Guardian or CMC. This could result in theft of the client token and sensitive information (such as assets and alerts), impersonation of the server, or injection of spoofed data (such as false asset information or vulnerabilities) into the Guardian or CMC.

A Stored HTML Injection vulnerability was discovered in the CMC's Sensor Map functionality due to improper validation on connected Guardians' properties. A malicious authenticated user with administrator privileges on a Guardian connected to a CMC can edit the Guardian's properties to inject HTML tags. If the Sensor Map functionality is enabled in the CMC, when a victim CMC user interacts with it, then the injected HTML may render in their browser, enabling phishing and possibly open redirect attacks. Full XSS exploitation and direct information disclosure are prevented by the existing input validation and Content Security Policy configuration.

A Stored HTML Injection vulnerability was discovered in the Alerted Nodes Dashboard functionality due to improper validation on an input parameter. A malicious authenticated user with the required privileges could edit a node label to inject HTML tags. If the system is configured to use the Alerted Nodes Dashboard, and alerts are reported for the affected node, then the injected HTML may render in the browser of a victim user interacting with it, enabling phishing and possibly open redirect attacks. Full XSS exploitation and direct information disclosure are prevented by the existing input validation and Content Security Policy configuration.

A logic error in the remove_password() function in Checkmk GmbH's Checkmk versions <2.4.0p23, <2.3.0p43, and 2.2.0 (EOL) allows a low-privileged user to cause data loss.

Dell PowerScale OneFS, version 9.13.0.0, contains an overly restrictive account lockout mechanism vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix use-after-free in nf_tables_addchain() nf_tables_addchain() publishes the chain to table->chains via list_add_tail_rcu() (in nft_chain_add()) before registering hooks. If nf_tables_register_hook() then fails, the error path calls nft_chain_del() (list_del_rcu()) followed by nf_tables_chain_destroy() with no RCU grace period in between. This creates two use-after-free conditions: 1) Control-plane: nf_tables_dump_chains() traverses table->chains under rcu_read_lock(). A concurrent dump can still be walking the chain when the error path frees it. 2) Packet path: for NFPROTO_INET, nf_register_net_hook() briefly installs the IPv4 hook before IPv6 registration fails. Packets entering nft_do_chain() via the transient IPv4 hook can still be dereferencing chain->blob_gen_X when the error path frees the chain. Add synchronize_rcu() between nft_chain_del() and the chain destroy so that all RCU readers -- both dump threads and in-flight packet evaluation -- have finished before the chain is freed.

Dell PowerScale OneFS, versions 9.10.0.0 through 9.13.1.0, contains an external control of system or configuration setting vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to protection mechanism bypass.

Dell PowerScale OneFS, versions prior to 9.10.1.6 and versions 9.11.0.0 through 9.12.0.1, contains an execution with unnecessary privileges vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges.

Dell PowerScale OneFS, versions prior to 9.10.1.6 and versions 9.11.0.0 through 9.12.0.1, contains an execution with unnecessary privileges vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to elevation of privileges.

Dell PowerScale OneFS, versions prior to 9.10.1.6 and versions 9.11.0.0 through 9.12.0.1, contains an execution with unnecessary privileges vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to denial of service, elevation of privileges, and information disclosure.