CVEs

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco 350 Series Managed Switches (SG350) and Cisco 350X Series Stackable Managed Switches (SG350X) firmware could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.  This vulnerability is due to improper error handling when parsing response data for a specific SNMP request. An attacker could exploit this vulnerability by sending a specific SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv2c or earlier, the attacker must know a valid read-write or read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system.

A vulnerability in the RADIUS Policy API endpoints of Cisco ISE could allow an authenticated, remote attacker with read-only Administrator privileges to gain unauthorized access to sensitive information on an affected device. This vulnerability is due to improper role-based access control (RBAC) permissions on the RADIUS Policy API endpoints. An attacker could exploit this vulnerability by bypassing the web-based management interface and directly calling an affected endpoint. A successful exploit could allow the attacker to gain unauthorized read access to sensitive RADIUS Policy details that are restricted for their role.

A vulnerability in an identity management API endpoint of Cisco ISE could allow an unauthenticated, remote attacker to enumerate valid user accounts on an affected device. This vulnerability exists because error messages are observed when the affected API endpoint is called. An attacker could exploit this vulnerability by sending a series of crafted requests to the affected endpoint and analyzing the differentiated responses. A successful exploit could allow the attacker to compile a list of valid usernames on an affected system.

NanoClaw version 1.2.0 and prior contains a host/container filesystem boundary vulnerability in outbound attachment handling and outbox cleanup that allows a compromised or prompt-injected container to read files outside the intended outbox directory by supplying crafted messages_out.id and content.files values or creating symlinked outbox files. Attackers can exploit this vulnerability to trigger host-side reads of arbitrary files and in some cases achieve recursive deletion of paths outside the intended cleanup target.

Uncontrolled Search Path Element vulnerability in WatchGuard Agent on Windows allows Using Malicious Files.This issue affects WatchGuard Agent before 1.25.03.0000.

Use of Hard-coded Cryptographic Key vulnerability in WatchGuard Agent on Windows allows Inclusion of Code in Existing Process.This issue affects WatchGuard Agent: before 1.25.03.0000.

Stack-based Buffer Overflow vulnerability in the WatchGuard Agent discovery service on Windows allows Overflow Buffers. An unauthenticated attacker on the same local network could exploit this vulnerability to crash the agent service.

Incorrect permission assignment for a resource in the patch management component of the WatchGuard Agent on Windows allows an authenticated local user to elevate their privileges to NT AUTHORITY\\SYSTEM.

The MongoDB C Driver's Cyrus SASL integration performs unsafe string copying during username canonicalization, enabling a heap buffer overflow before any authentication or network traffic. This may be triggered by passing untrusted input in the username of a MongoDB URI with authMechanism=GSSAPI.

Velociraptor versions prior to 0.76.4 contain a cross organization authorization bypass in the HTTP API. A user with only the reader role in the root organization (the lowest authenticated role, holding only READ_RESULTS permission ) can issue a single authenticated HTTP GET that can read any files from other orgs - even if they have no explicit permissions in the target org. However, the problem does not occur in reverse - a user with read access to a sub org is unable to read from other org or the root org.

A vulnerability was detected in FlowiseAI Flowise up to 3.0.12. This affects the function verify of the file packages/server/src/enterprise/services/account.service.ts of the component Endpoint. Performing a manipulation results in information disclosure. Remote exploitation of the attack is possible. The attack is considered to have high complexity. It is indicated that the exploitability is difficult. The exploit is now public and may be used. Upgrading the affected component is recommended.

HCL BigFix Service Management (SM) is affected by an Information Disclosure – Server Banner issue was identified. Exposed server banners may reveal software versions and system details, potentially aiding attackers in targeting known vulnerabilities.

HCL BigFix Service Management (SM) is affected by use of a vulnerable WSGI Server was identified. Deploying an outdated or insecure WSGI server may expose the application to known security weaknesses, potentially increasing the risk of exploitation and unauthorized access.

HCL BigFix Service Management (SM) is vulnerable to insufficiently protected credentials for a short duration while communicating with a backend, internal application which could allow an attacker to potentially misuse them, if exfiltrated. .

HCL BigFix Service Management (SM) does not adequately sanitize or safely render spreadsheet files (CSV, XLS, XLSX) before processing or distributing them. An attacker could populate data fields which, when saved to a CSV file, may attempt information exfiltration or other malicious activity when automatically executed by the spreadsheet software. Note that current versions of Excel warn users of untrusted content.

HCL BigFix Service Management (SM) application fails to strip EXIF metadata from uploaded images. This could lead to confidentiality and privacy risks if sensitive location information is unintentionally shared. .

HCL BigFix Service Management (SM) had directories that were not linked or publicly visible but could be accessed directly. This could allow an increased risk of information disclosure or misuse of sensitive functionality.

A weakness has been identified in FlowiseAI Flowise up to 3.0.12. Affected by this vulnerability is an unknown functionality of the component User Controller Handler. This manipulation of the argument userId/organizationId/workspaceId/email causes authorization bypass. The attack may be initiated remotely. The affected component should be upgraded.

HCL BigFix Service Management (SM) is affected by a security misconfiguration due to a missing or insecure “X-Content-Type-Options” header. This could allow browsers to perform MIME-type sniffing, potentially causing malicious content to be interpreted and executed incorrectly.

HCL BigFix Service Management (SM) is affected by a security misconfiguration vulnerability due to CSP header. This could allow attackers to inject malicious scripts increasing the risk of cross-site scripting (XSS) and potential exposure of sensitive information.

Stack-based Buffer Overflow vulnerability in the WatchGuard Agent discovery service on Windows allows Overflow Buffers. An unauthenticated attacker on the same local network could exploit this vulnerability to crash the agent service.

HHCL BigFix Service Management (SM) is affected by a Cross‑Site Request Forgery (CSRF) vulnerability. This could lead to unauthorized changes or exposure of sensitive data.

Gazelle versions through 0.49 for Perl allows HTTP Request Smuggling via Improper Header Precedence. Gazelle incorrectly prioritizes "Content-Length" over "Transfer-Encoding: chunked" when both headers are present in an HTTP request. Per RFC 7230 3.3.3, Transfer-Encoding must take precedence. An attacker could exploit this to smuggle malicious HTTP requests via a front-end reverse proxy.

A security flaw has been discovered in FlowiseAI Flowise up to 3.0.12. Affected is the function Login of the file packages/server/src/enterprise/services/account.service.ts of the component API Response Handler. The manipulation results in information disclosure. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is told to be difficult. You should upgrade the affected component.

Apache::Session::Generate::ModUniqueId versions from 1.54 through 1.94 for Perl session ids are insecure. Apache::Session::Generate::ModUniqueId (added in version 1.54) uses the value of the UNIQUE_ID environment variable for the session id. The UNIQUE_ID variable is set by the Apache mod_unique_id plugin, which generates unique ids for the request. The id is based on the IPv4 address, the process id, the epoch time, a 16-bit counter and a thread index, with no obfuscation. The server IP is often available to the public, and if not available, can be guessed from previous session ids being issued. The process ids may also be guessed from previous session ids. The timestamp is easily guessed (and leaked in the HTTP Date response header). The purpose of mod_unique_id is to assign a unique id to requests so that events can be correlated in different logs. The id is not designed, nor is it suitable for security purposes.

A type confusion vulnerability in Qt SVG allows an attacker to cause an application crash via a crafted SVG image. When processing SVG marker references, the renderer retrieves a node by its id attribute and casts it to QSvgMarker* without verifying the node type. A non-marker element (such as a <line> element) that references itself as a marker triggers an out-of-bounds heap read due to the object size difference between QSvgLine and QSvgMarker, followed by an endless recursion that bypasses the marker recursion guard through incorrect virtual dispatch. The result is an application crash (denial of service). This issue affects Qt SVG:  from 6.7.0 before 6.8.8, from 6.9.0 before 6.11.1.

HCL BigFix RunBookAI is affected by a Continued availability of Less-Secure “Input Text” Vulnerability . A component contains a security weakness in its input handling implementation, increasing the risk of misconfiguration and operational errors.

HCL BigFix RunBookAI is affected by a Unvalidated Command Input / Potential Command Smuggling vulnerability. A flaw in a component's input handling was identified that could permit unauthorized command execution.

In the Linux kernel, the following vulnerability has been resolved: fs/buffer: add alert in try_to_free_buffers() for folios without buffers try_to_free_buffers() can be called on folios with no buffers attached when filemap_release_folio() is invoked on a folio belonging to a mapping with AS_RELEASE_ALWAYS set but no release_folio operation defined. In such cases, folio_needs_release() returns true because of the AS_RELEASE_ALWAYS flag, but the folio has no private buffer data. This causes try_to_free_buffers() to call drop_buffers() on a folio with no buffers, leading to a null pointer dereference. Adding a check in try_to_free_buffers() to return early if the folio has no buffers attached, with WARN_ON_ONCE() to alert about the misconfiguration. This provides defensive hardening.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix NULL pointer issue buffer funcs If SDMA block not enabled, buffer_funcs will not initialize, fix the null pointer issue if buffer_funcs not initialized.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/ras: Move ras data alloc before bad page check In the rare event if eeprom has only invalid address entries, allocation is skipped, this causes following NULL pointer issue [ 547.103445] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 547.118897] #PF: supervisor read access in kernel mode [ 547.130292] #PF: error_code(0x0000) - not-present page [ 547.141689] PGD 124757067 P4D 0 [ 547.148842] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 547.158504] CPU: 49 PID: 8167 Comm: cat Tainted: G OE 6.8.0-38-generic #38-Ubuntu [ 547.177998] Hardware name: Supermicro AS -8126GS-TNMR/H14DSG-OD, BIOS 1.7 09/12/2025 [ 547.195178] RIP: 0010:amdgpu_ras_sysfs_badpages_read+0x2f2/0x5d0 [amdgpu] [ 547.210375] Code: e8 63 78 82 c0 45 31 d2 45 3b 75 08 48 8b 45 a0 73 44 44 89 f1 48 8b 7d 88 48 89 ca 48 c1 e2 05 48 29 ca 49 8b 4d 00 48 01 d1 <48> 83 79 10 00 74 17 49 63 f2 48 8b 49 08 41 83 c2 01 48 8d 34 76 [ 547.252045] RSP: 0018:ffa0000067287ac0 EFLAGS: 00010246 [ 547.263636] RAX: ff11000167c28130 RBX: ff11000127600000 RCX: 0000000000000000 [ 547.279467] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ff11000125b1c800 [ 547.295298] RBP: ffa0000067287b50 R08: 0000000000000000 R09: 0000000000000000 [ 547.311129] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 547.326959] R13: ff11000217b1de00 R14: 0000000000000000 R15: 0000000000000092 [ 547.342790] FS: 0000746e59d14740(0000) GS:ff11017dfda80000(0000) knlGS:0000000000000000 [ 547.360744] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 547.373489] CR2: 0000000000000010 CR3: 000000019585e001 CR4: 0000000000f71ef0 [ 547.389321] PKRU: 55555554 [ 547.395316] Call Trace: [ 547.400737] <TASK> [ 547.405386] ? show_regs+0x6d/0x80 [ 547.412929] ? __die+0x24/0x80 [ 547.419697] ? page_fault_oops+0x99/0x1b0 [ 547.428588] ? do_user_addr_fault+0x2ee/0x6b0 [ 547.438249] ? exc_page_fault+0x83/0

In the Linux kernel, the following vulnerability has been resolved: jfs: nlink overflow in jfs_rename If nlink is maximal for a directory (-1) and inside that directory you perform a rename for some child directory (not moving from the parent), then the nlink of the first directory is first incremented and later decremented. Normally this is fine, but when nlink = -1 this causes a wrap around to 0, and then drop_nlink issues a warning. After applying the patch syzbot no longer issues any warnings. I also ran some basic fs tests to look for any regressions.

In the Linux kernel, the following vulnerability has been resolved: misc: bcm_vk: Fix possible null-pointer dereferences in bcm_vk_read() In the function bcm_vk_read(), the pointer entry is checked, indicating that it can be NULL. If entry is NULL and rc is set to -EMSGSIZE, the following code may cause null-pointer dereferences: struct vk_msg_blk tmp_msg = entry->to_h_msg[0]; set_msg_id(&tmp_msg, entry->usr_msg_id); tmp_msg.size = entry->to_h_blks - 1; To prevent these possible null-pointer dereferences, copy to_h_msg, usr_msg_id, and to_h_blks from iter into temporary variables, and return these temporary variables to the application instead of accessing them through a potentially NULL entry.

In the Linux kernel, the following vulnerability has been resolved: misc: ti_fpc202: fix a potential memory leak in probe function Use for_each_child_of_node_scoped() to simplify the code and ensure the device node reference is automatically released when the loop scope ends.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: handle attr_set_size() errors when truncating files If attr_set_size() fails while truncating down, the error is silently ignored and the inode may be left in an inconsistent state.

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leaks on common probe Make sure to drop the reference taken when looking up the SMI device during common probe on late probe failure (e.g. probe deferral) and on driver unbind.

In the Linux kernel, the following vulnerability has been resolved: memory: mtk-smi: fix device leak on larb probe Make sure to drop the reference taken when looking up the SMI device during larb probe on late probe failure (e.g. probe deferral) and on driver unbind.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Correct the allocation size for bytes controls The size of the data behind of scontrol->ipc_control_data for bytes controls is: [1] sizeof(struct sof_ipc4_control_data) + // kernel only struct [2] sizeof(struct sof_abi_hdr)) + payload The max_size specifies the size of [2] and it is coming from topology. Change the function to take this into account and allocate adequate amount of memory behind scontrol->ipc_control_data. With the change we will allocate [1] amount more memory to be able to hold the full size of data.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels MHI stack offers the 'auto_queue' feature, which allows the MHI stack to auto queue the buffers for the RX path (DL channel). Though this feature simplifies the client driver design, it introduces race between the client drivers and the MHI stack. For instance, with auto_queue, the 'dl_callback' for the DL channel may get called before the client driver is fully probed. This means, by the time the dl_callback gets called, the client driver's structures might not be initialized, leading to NULL ptr dereference. Currently, the drivers have to workaround this issue by initializing the internal structures before calling mhi_prepare_for_transfer_autoqueue(). But even so, there is a chance that the client driver's internal code path may call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() is called, leading to similar NULL ptr dereference. This issue has been reported on the Qcom X1E80100 CRD machines affecting boot. So to properly fix all these races, drop the MHI 'auto_queue' feature altogether and let the client driver (QRTR) manage the RX buffers manually. In the QRTR driver, queue the RX buffers based on the ring length during probe and recycle the buffers in 'dl_callback' once they are consumed. This also warrants removing the setting of 'auto_queue' flag from controller drivers. Currently, this 'auto_queue' feature is only enabled for IPCR DL channel. So only the QRTR client driver requires the modification.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ec_bhf: Fix dma_free_coherent() dma handle dma_free_coherent() in error path takes priv->rx_buf.alloc_len as the dma handle. This would lead to improper unmapping of the buffer. Change the dma handle to priv->rx_buf.alloc_phys.

In the Linux kernel, the following vulnerability has been resolved: RDMA/ionic: Fix potential NULL pointer dereference in ionic_query_port The function ionic_query_port() calls ib_device_get_netdev() without checking the return value which could lead to NULL pointer dereference, Fix it by checking the return value and return -ENODEV if the 'ndev' is NULL.

In the Linux kernel, the following vulnerability has been resolved: mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate() Although it is guided that `#mbox-cells` must be at least 1, there are many instances of `#mbox-cells = <0>;` in the device tree. If that is the case and the corresponding mailbox controller does not provide `fw_xlate` and of_xlate` function pointers, `fw_mbox_index_xlate()` will be used by default and out-of-bounds accesses could occur due to lack of bounds check in that function.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Add bounds check on pat_index to prevent OOB kernel read in madvise When user provides a bogus pat_index value through the madvise IOCTL, the xe_pat_index_get_coh_mode() function performs an array access without validating bounds. This allows a malicious user to trigger an out-of-bounds kernel read from the xe->pat.table array. The vulnerability exists because the validation in madvise_args_are_sane() directly calls xe_pat_index_get_coh_mode(xe, args->pat_index.val) without first checking if pat_index is within [0, xe->pat.n_entries). Although xe_pat_index_get_coh_mode() has a WARN_ON to catch this in debug builds, it still performs the unsafe array access in production kernels. v2(Matthew Auld) - Using array_index_nospec() to mitigate spectre attacks when the value is used v3(Matthew Auld) - Put the declarations at the start of the block (cherry picked from commit 944a3329b05510d55c69c2ef455136e2fc02de29)

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Add sanity check for OOB writes at silencing At silencing the playback URB packets in the implicit fb mode before the actual playback, we blindly assume that the received packets fit with the buffer size. But when the setup in the capture stream differs from the playback stream (e.g. due to the USB core limitation of max packet size), such an inconsistency may lead to OOB writes to the buffer, resulting in a crash. For addressing it, add a sanity check of the transfer buffer size at prepare_silent_urb(), and stop the data copy if the received data overflows. Also, report back the transfer error properly from there, too. Note that this doesn't fix the root cause of the playback error itself, but this merely covers the kernel Oops.

In the Linux kernel, the following vulnerability has been resolved: dm: clear cloned request bio pointer when last clone bio completes Stale rq->bio values have been observed to cause double-initialization of cloned bios in request-based device-mapper targets, leading to use-after-free and double-free scenarios. One such case occurs when using dm-multipath on top of a PCIe NVMe namespace, where cloned request bios are freed during blk_complete_request(), but rq->bio is left intact. Subsequent clone teardown then attempts to free the same bios again via blk_rq_unprep_clone(). The resulting double-free path looks like: nvme_pci_complete_batch() nvme_complete_batch() blk_mq_end_request_batch() blk_complete_request() // called on a DM clone request bio_endio() // first free of all clone bios ... rq->end_io() // end_clone_request() dm_complete_request(tio->orig) dm_softirq_done() dm_done() dm_end_request() blk_rq_unprep_clone() // second free of clone bios Fix this by clearing the clone request's bio pointer when the last cloned bio completes, ensuring that later teardown paths do not attempt to free already-released bios.

In the Linux kernel, the following vulnerability has been resolved: APEI/GHES: ensure that won't go past CPER allocated record The logic at ghes_new() prevents allocating too large records, by checking if they're bigger than GHES_ESTATUS_MAX_SIZE (currently, 64KB). Yet, the allocation is done with the actual number of pages from the CPER bios table location, which can be smaller. Yet, a bad firmware could send data with a different size, which might be bigger than the allocated memory, causing an OOPS: Unable to handle kernel paging request at virtual address fff00000f9b40000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault Data abort info: ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 52-bit VAs, pgdp=000000008ba16000 [fff00000f9b40000] pgd=180000013ffff403, p4d=180000013fffe403, pud=180000013f85b403, pmd=180000013f68d403, pte=0000000000000000 Internal error: Oops: 0000000096000007 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 303 Comm: kworker/0:1 Not tainted 6.19.0-rc1-00002-gda407d200220 #34 PREEMPT Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022 Workqueue: kacpi_notify acpi_os_execute_deferred pstate: 214020c5 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : hex_dump_to_buffer+0x30c/0x4a0 lr : hex_dump_to_buffer+0x328/0x4a0 sp : ffff800080e13880 x29: ffff800080e13880 x28: ffffac9aba86f6a8 x27: 0000000000000083 x26: fff00000f9b3fffc x25: 0000000000000004 x24: 0000000000000004 x23: ffff800080e13905 x22: 0000000000000010 x21: 0000000000000083 x20: 0000000000000001 x19: 0000000000000008 x18: 0000000000000010 x17: 0000000000000001 x16: 00000007c7f20fec x15: 0000000000000020 x14: 0000000000000008 x13:

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix double destroy_workqueue on service rescan PCI path While testing corner cases in the driver, a use-after-free crash was found on the service rescan PCI path. When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup() destroys gc->service_wq. If the subsequent mana_gd_resume() fails with -ETIMEDOUT or -EPROTO, the code falls through to mana_serv_rescan() which triggers pci_stop_and_remove_bus_device(). This invokes the PCI .remove callback (mana_gd_remove), which calls mana_gd_cleanup() a second time, attempting to destroy the already- freed workqueue. Fix this by NULL-checking gc->service_wq in mana_gd_cleanup() and setting it to NULL after destruction. Call stack of issue for reference: [Sat Feb 21 18:53:48 2026] Call Trace: [Sat Feb 21 18:53:48 2026] <TASK> [Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana] [Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana] [Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0 [Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70 [Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250 [Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20 [Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90 [Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30 [Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana] [Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana] [Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0 [Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0 [Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130 [Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350 [Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10 [Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30 [Sat Feb 21 18:53:48 2026] </TASK>

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Flush exception handling work when RPM level is zero Ensure that the exception event handling work is explicitly flushed during suspend when the runtime power management level is set to UFS_PM_LVL_0. When the RPM level is zero, the device power mode and link state both remain active. Previously, the UFS core driver bypassed flushing exception event handling jobs in this configuration. This created a race condition where the driver could attempt to access the host controller to handle an exception after the system had already entered a deep power-down state, resulting in a system crash. Explicitly flush this work and disable auto BKOPs before the suspend callback proceeds. This guarantees that pending exception tasks complete and prevents illegal hardware access during the power-down sequence.

In the Linux kernel, the following vulnerability has been resolved: mailbox: mchp-ipc-sbi: fix out-of-bounds access in mchp_ipc_get_cluster_aggr_irq() The cluster_cfg array is dynamically allocated to hold per-CPU configuration structures, with its size based on the number of online CPUs. Previously, this array was indexed using hartid, which may be non-contiguous or exceed the bounds of the array, leading to out-of-bounds access. Switch to using cpuid as the index, as it is guaranteed to be within the valid range provided by for_each_online_cpu().

In the Linux kernel, the following vulnerability has been resolved: ceph: supply snapshot context in ceph_zero_partial_object() The ceph_zero_partial_object function was missing proper snapshot context for its OSD write operations, which could lead to data inconsistencies in snapshots. Reproducer: ../src/vstart.sh --new -x --localhost --bluestore ./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a' mount -t ceph fs_a@.a=/ /mnt/mycephfs/ -o conf=./ceph.conf dd if=/dev/urandom of=/mnt/mycephfs/foo bs=64K count=1 mkdir /mnt/mycephfs/.snap/snap1 md5sum /mnt/mycephfs/.snap/snap1/foo fallocate -p -o 0 -l 4096 /mnt/mycephfs/foo echo 3 > /proc/sys/vm/drop/caches md5sum /mnt/mycephfs/.snap/snap1/foo # get different md5sum!!